Floor and ground surfaces shall be stable, firm, and slip resistant and shall comply with 11B-302....
Search Results "Ligature Resistant"
Filters
Commonly Searched Documents
-
11B-302.1 General
-
INTRODUCTION
INTRODUCTION The Americans with Disabilities Act (ADA) Accessibility Guidelines currently specify that surfaces that are required to be accessible must be “stable, firm, and slip resistant...
-
Surface Textures [4.3.6]
Accessible routes do not necessarily have to be paved, but must be "firm, stable, and slip-resistant" so that they are safe and usable by people who use wheelchairs or who walk with difficulty...
-
§ 38.153(a)
(a) Floor surfaces on aisles, step treads and areas where wheelchair and mobility aid users are to be accommodated shall be slip-resistant....
-
§ 38.117(a)
(a) Floor surfaces on aisles, step treads and areas where wheelchair and mobility aid users are to be accommodated shall be slip-resistant....
-
Weizel Security 826-S74 SR™ Partition Door
Ligature Resistance is achieved by minimizing potential hanging points on all 4 sides of the door....
-
General [4.5.1]
No standard or method of measurement exists for these characteristics except for slip-resistance....
-
Behavioral Safety Products #TC230 Suicide Resistant Standard Trap Cover
This suicide resistant trap cover is designed to cover plumbing under most conventional wall mounted sinks to prevent access to the plumbing....
-
§ 38.23(c)(2) Ramp surface
The ramp surface shall be continuous and slip resistant; shall not have protrusions from the surface greater than 1/4 inch high; shall have a clear width of 30 inches; and shall accommodate...
-
Comfort Designs Tamper Proof Anti-ligature Grab Bars
Tamper proof anti-ligature grab bars are designed to prevent tying of materials by eliminating space between wall and bar. Weep holes allow for water drainage....
-
I. Slip Resistant Surface—Aisles, Steps, Floor Areas Where People Walk, Floor Areas in Securement Locations, Lift Platforms, Ramps
Slip Resistant Surface—Aisles, Steps, Floor Areas Where People Walk, Floor Areas in Securement Locations, Lift Platforms, Ramps Slip resistance is based on the frictional force necessary...
-
Acceptable Trail Surfacing Requirements
Trail surfaces are currently considered accessible only if the surfacing material is firm, stable, and slip-resistant and the trail has the engineered attributes of adequate width, moderately...
-
M304.2 Standing Surface (Section-by-Section Analysis)
The MDE NPRM proposed to require that the standing surface on which patients stand be slip resistant....
-
M304.2 Standing Surface
The surface on which the patient stands shall be slip resistant....
-
4.5.1* General
Ground and floor surfaces along accessible routes and in accessible rooms and spaces including floors, walks, ramps, stairs, and curb ramps, shall be stable, firm, slip-resistant, and shall...
-
4.5.1* GENERAL
Ground and floor surfaces along accessible routes and in accessible rooms and spaces, including floors, walks, ramps, stairs, and curb ramps, shall be stable, firm, slip-resistant, and shall...
-
§ 38.159(c)(2) Ramp surface
The ramp surface shall be continuous and slip resistant; shall not have protrusions from the surface greater than 1/4 inch (6.5 mm) high; shall have a clear width of 30 inches (760 mm);...
-
Whitehall Mfg. 24" Grab Bar Flat Closure Plate
Model Number: 1109-1 Features: 304 stainless steel cylindrical tub construction; a flat closure plate is welded on to meet Ligature-Resistant requirements....
-
Whitehall Mfg. 24" Grab Bar L-Shaped Closure Plate
Model Number: 1110-1 Features: 304 stainless steel cylindrical tub construction; a L-shaped closure plate is welded on to meet Ligature-Resistant requirements....
-
§ 38.159(b)(6) Platform surface
The platform surface shall be free of any protrusions of 1/4 inch (6.5 mm) high and shall be slip resistant....
-
Eco Grip Flooring 2min HD
Eco-Grip slip resistant flooring offers a new dimension in safe flooring....
-
Exterior Surfaces
Materials such as gravel, wood chips, or sand which are often used for outdoor walkways are neither firm or stable nor are they generally considered slip-resistant....
-
T302.1 General
Walking surfaces in non-rail vehicles shall comply with T302. EXCEPTION: Walking surfaces on lifts shall not be required to comply with T302.
-
T302 Walking Surfaces
[See subsections ...]
