Changes in level up to 1/4 in (6 mm) may be vertical and without edge treatment (see Fig. 7(c))....
Search Results "Change Machine"
Filters
Commonly Searched Documents
-
4.5.2 CHANGES IN LEVEL
-
R407.6.4 Change in Direction
R407.6.4 Change in Direction. Ramps that change direction between runs at landings shall have a clear landing 1.5 m (5.0 ft) minimum by 1.5 m (5.0 ft) minimum....
-
Slope: ADA Standard Section 405.7.1
Section 405.7.1 covers the current ADA Standards for the slope in ramp landings.
-
SECTION 1131A CHANGES IN LEVEL ON ACCESSIBLE ROUTES
SECTION 1131A CHANGES IN LEVEL ON ACCESSIBLE ROUTES...
-
4.3.8 CHANGES IN LEVELS
Changes in levels along an accessible route shall comply with 4.5.2....
-
11B-813.2.5 Coat hook
No fewer than one coat hook shall be provided in close proximity to the changing table and within one of the reach ranges specified in Section 11B-308....
-
11B-220 Automatic teller machines, fare machines and point-of-sale devices.
[2010 ADAS] 220 Automatic Teller Machines and Fare Machines ...
-
11B-405.4 Floor or ground surfaces
Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
4.3.8 Changes in Levels
Changes in levels along an accessible route shall comply with 4.5.2....
-
11B-813.2.6 Shelf
No fewer than one shelf shall be provided in close proximity to the changing table at 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor....
-
403.4 Changes in Level
Changes in level shall comply with 303....
-
403.4 Changes in Level
Changes in level shall comply with 303....
-
5.4 VENDING MACHINES
Install vending machines in compliance with 4.27....
-
11B-220 Automatic teller machines, fare machines and point-of-sale devices
[2010 ADA Standards] 220 Automatic Teller Machines and Fare Machines ETA Editor’s Note The CBC includes point-of-sale devices. Therefore, the CBC is more inclusive....
-
11B-220 AUTOMATIC TELLER MACHINES, FARE MACHINES AND POINT-OF-SALE DEVICES
[2010 ADAS] 220 Automatic Teller Machines and Fare Machines ETA Editor's Note The ADA requirements included at Section 11B-220 are provided for information only....
-
Interactive Transaction Machines (ITMs)
Section 707 specifically covers ATMs and fare machines....
-
Input: ADA Standard Section 707.6
Input devices shall comply with 707.6.
-
Function Keys: ADA Standard Section 707.6.3
Function keys shall comply with 707.6.3.
-
11B.707.7.1.3 Horizontally mounted display screen
Where display screens are mounted tipped away from the viewer 60 degrees to 90 degrees (horizontal) from vertical, the center line of the display screen and other display devices...
-
11B.707.7.1.2 Angle-mounted display screen
Where display screens are mounted tipped away from the viewer 30 degrees to less than 60 degrees from vertical, the center line of the display screen and other display devices shall...
-
11B.707.7.1.1 Vertically mounted display screen
Where display screens are mounted vertically or tipped away from the viewer less than 30 degrees, the center line of the display screen and other display devices shall be no more...
-
11B-707.6.3 Function keys
Function keys shall comply with Section 11B-707.6.3.
-
303 Changes in Level
[See subsections ...]
-
303 Changes in Level
[See subsections ...]