Section 606 covers the current ADA Standards for lavatories and sinks.
Search Results "Built-In Element"
Filters
Commonly Searched Documents
-
Lavatories and Sinks: ADA Standard Section 606
-
11B-608.1 General
Shower compartments shall comply with Section 11B-608. Advisory 11B-608.1 General. Shower stalls that are 60 inches (1525 mm) wide and have no curb may increase the usability of a...
-
11B-608 Shower compartments
[See subsections ...]
-
11B-606 Lavatories and sinks
[See subsections ...]
-
11B-608.2.2 Standard roll-in type shower compartments
Standard roll-in type shower compartments shall be 30 inches (762 mm) wide minimum by 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing...
-
11B-608.2.1 Transfer type shower compartments
Transfer type shower compartments shall be 36 inches (914 mm) by 36 inches (914 mm) clear inside dimensions measured at the center points of opposing sides and shall have a 36 inch...
-
11B-608.2 Size and clearances for shower compartments
Shower compartments shall have sizes and clearances complying with Section 11B-608.2.
-
11B-213.3.2 Water closets
Where water closets are provided, at least 5 percent but no fewer tan one shall comply with Section 11B-604. [2010 ADA Standards] 213.3.2 Water Closets. Where water closets are...
-
Technical Memorandum TM 2013-22 Storage (Kitchens and Kitchenettes)
.* For purposes of compliance with TAS 804.5, a kitchen or kitchenette is any subject room or space that has fixed or built-in cooking facilities....
-
Example 1: With Cooking Facilities
Cooking Facilities: Fixed or built-in range, cooktop, oven, microwave, or convection oven....
-
Design Guidelines for the Visual Environment
This guideline was developed by the Low Vision Design Committee of the National Institute of Building Sciences (NIBS) through initial funding from the U.S. General Services...
-
Storage [9.2.2(4)]
Storage [9.2.2(4)] At least one of each type of fixed or built-in storage facility (cabinets, shelves, closets, drawers) provided in accessible spaces must be accessible as specified...
-
Standard Roll-In Type Shower Compartments: ADA Standard Section 608.5.2
Section 608.5.2 covers the current ADA Standards for controls in standard roll-in type shower compartments.
-
Noncomplying new construction and alterations. (Section-by-Section Analysis)
The element-by-element safe harbor referenced in Sec. 36.304(d)(2) has no effect on new or altered elements in existing facilities that were subject to the 1991 Standards on the date that...
-
Storage: ADA Standard Section 225.2
Section 225.2 covers scoping requirements in the current ADA Standards for storage.
-
11B-226.2 Dispersion
Dining surfaces required to comply with Section 11B-902 shall be dispersed throughout the space or facility containing dining surfaces for each type of seating in a functional area....
-
Height of Tables or Counters [4.32.4]
Height of Tables or Counters [4.32.4] Counter and table surface heights (28 to 34 inches) should be specified in consideration of the intended use. A height at the lower end of...
-
4.32.4* Height of Tables or Counters
The tops of accessible tables and counters shall be from 28 in to 34 in (710 mm to 865 mm) above the finish floor or ground.
-
4.32.4* HEIGHT OF WORK SURFACES
The tops of tables and work surfaces shall be from 28 in to 34 in (710 mm to 865 mm) from the floor or ground.
-
F244.2.3 Elements Within Camping Units with Mobility Features
Elements within camping units required to provide mobility features shall comply with F244.2.3....
-
F245.2.5 Elements Within Picnic Units with Mobility Features
Elements within picnic units required to provide mobility features shall comply with F245.2.5....
-
11B-203.1 General
Sites, buildings, facilities, and elements are exempt from these requirements to the extent specified by 11B-203....
-
Alternate Roll-In Type Shower Compartments: ADA Standard Section 608.5.3
Section 608.5.3 covers the current ADA Standards for controls in alternate roll-in type shower compartments.
