Section 221.2.3.2 covers scoping requirements in the current ADA Standards for vertical dispersion in assembly areas.
Search Results "Shall"
Filters
Commonly Searched Documents
-
Vertical Dispersion: ADA Standard Section 221.2.3.2
-
Alterations: ADA Standard Section 202.3
Section 202.3 covers the most current requirements for alterations in existing building and facilities.
-
Restaurants and Cafeterias: ADA Standard Section 206.2.5
Section 206.2.5 covers scoping requirements in the most current ADA Standards for accessible routes in restaurants and cafeterias
-
Residential Dwelling Units Provided by Entities Subject to HUD Section 504 Regulations: ADA Standard Section 233.2
Section 233.2 covers scoping requirements in the current ADA Standards for residential dwelling units provided by entities subject to HUD Section 504 Regulations.
-
Minimum Number: ADA Standard Section 234.3
Section 234.3 covers scoping requirements in the current ADA Standards for the minimum number of wheelchair spaces required at amusement rides.
-
11B-405.7.5 Doorways
Where doorways are located adjacent to a ramp landing, maneuvering clearances required by Sections 11B-404.2.4 and 11B-404.3.2 shall be permitted to overlap the required landing area....
-
11B-302.1 General
Floor and ground surfaces shall be stable, firm, and slip resistant and shall comply with 11B-302....
-
Water Play Components: ADA Standard Section 1008.2.3
Accessible routes serving water play components shall be permitted to use the exceptions in 1008.2.3. EXCEPTIONS: 1....
-
Accessible Routes: ADA Standard Section 1002.2
Accessible routes serving amusement rides shall comply with Chapter 4. EXCEPTIONS: 1....
-
Facilities Not Specializing in Treating Conditions That Affect Mobility: ADA Standard Section 223.2.1
Section 223.2.1 covers scoping requirements in the current ADA Standards for facilities not specializing in treating conditions that affect mobility.
-
Miniature Golf Course Configuration: ADA Standard Section 239.3
Section 239.3 covers scoping requirements in the current ADA Standards for miniature golf course configuration.
-
11B-221.4 Designated aisle seats
At least 5 percent of the total number of aisle seats provided shall comply with Section 11B-802.4 and shall be the aisle seats located closest to accessible routes....
-
11B-705.1.2.2.2.2 Two entrance/exit points
Where the turning space has two entrance/exit points other than the sloped ramp segments, detectable warnings shall be 36 inches (914 mm) deep at both entrance/ exit points, as measured...
-
11B-809.4 Toilet facilities and bathing facilities
At least one bathroom shall comply with Section 11B-603....
-
11B-239.3 Miniature golf course configuration
Miniature golf courses shall be configured so that the holes complying with Section 11B-1007.3 are consecutive....
-
11B-404.3 Automatic and power-assisted doors and gates
Automatic doors and automatic gates shall comply with Section 11B-404.3. Full-powered automatic doors shall comply with ANSI/BHMA A156.10....
-
11B-606.3 Height
Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches (864 mm) maximum above the finish floor or ground....
-
907.5.2.3.1 Public use areas and common use areas
Visible alarm notification appliances shall be provided in public use areas and common use area, including but not limited to: Band rooms Classrooms Corridors Gymnasiums Lobbies...
-
Finish and Contrast: ADA Standard Section 703.6.2
Pictograms and their field shall have a non-glare finish....
-
Passing Spaces: ADA Standard Section 403.5.3
Section 403.5.3 covers the current ADA Standards for passing spaces that are part of an accessible route.
-
General: ADA Standard Section 404.1
Section 404.1 of the ADA Standards covers information in the current ADA Standards for doors, doorways, and gates that are part of an accessible route.
-
General: ADA Standard Section 902.1
Dining surfaces and work surfaces shall comply with 902.2 and 902.3. EXCEPTION: Dining surfaces and work surfaces for children’s use shall be permitted to comply with 902.4....
-
11B-403.5.2 Clear width at turn
Where the accessible route makes a 180 degree turn around an element which is less than 48 inches (1219 mm) wide, clear width shall be 42 inches (1067 mm) minimum approaching the turn, 48...
-
11B-206.5.2 Rooms and spaces
Within a building or facility, every door, doorway or gate serving rooms and spaces complying with this chapter shall comply with Section 11B-404....