The slope of the turning space in all directions shall be 1:48 maximum....
Search Results "Detectable Directional Texture"
-
11B-406.3.2 Turning space
-
Head Room [4.4.2]
Otherwise, fixed barriers detectable by canes must define areas with less clearance. Gates, rails, curbs, and other fixed elements, such as planters, can serve as barriers....
-
11B-411.2.1.5.1 Size
The buttons shall be activated by a mechanical motion that is detectable....
-
907.2.5 Group H
An automatic smoke detection system shall be installed for highly toxic gases, organic peroxides and oxidizers in accordance with Chapters 37, 39 and 40 respectively of the International...
-
J6
above the floor so that it provides the space needed for a person who uses a wheelchair to pull up under it but is not a hazard to people who are blind or have low vision and use a cane to detect...
-
E2-2. Overhead Objects
Placing a detectable object on the floor below each object may remove the hazard for election day....
-
11B-411.2.1.5.1 Size
The buttons shall be activated by a mechanical motion that is detectable....
-
11B-411.2.1.5.1 Size
The buttons shall be activated by a mechanical motion that is detectable....
-
11B-406.5.6 Grade breaks
Grade breaks at the top and bottom of curb ramp runs shall be perpendicular to the direction of the ramp run....
-
11B-406.5.6 Grade breaks
Grade breaks at the top and bottom of curb ramp runs shall be perpendicular to the direction of the ramp run....
-
M-D Building Products, Inc. GEN2 SmartTool™ Digital Level
Directional beep Guides you to your angle so you don’t have to see the level Beep rate increases as angle is approached Steady beep when angle achieved Changes tone when gone...
-
Baseline
warning surfaces on curb ramps All state transportation departments currently specify detectable warning surfaces on curb ramps in their standard drawings; most local transportation...
-
11B-608.9 Shower floor or ground surface
Floor or ground surfaces of showers shall comply with Section 11B-302.1 and shall be sloped 1:48 maximum in any direction....
-
11B-809.10.6.2 Slope
The slope of the shower floor shall be 1/2 inch (12.7 mm) per foot maximum in any direction and shall slope to a drain....
-
ACCESSIBILITY FUNCTION BUTTON
destination-oriented elevator system that when pressed will activate a series of visual and verbal prompts and announcements providing instruction regarding hall call console operation and direction...
-
ACCESSIBILITY FUNCTION BUTTON
destination-oriented elevator system that when pressed will activate a series of visual and verbal prompts and announcements providing instruction regarding hall call console operation and direction...
-
11B-608.9 Shower floor or ground surface
Floor or ground surfaces of showers shall comply with Section 11B-302.1 and shall be sloped 1:48 maximum in any direction....
-
11B-809.10.6.2 Slope
The slope of the shower floor shall be 1/2 inch (12.7 mm) per foot maximum in any direction and shall slope to a drain....
-
Bobrick Automatic Foam Dispenser B-8263
Touch-free sensor detects user's hand to automatically dispense controlled amount (0.8ml) of soap; activation range is 4" (100mm) from sensor lens....
-
Bobrick Automatic Liquid Soap Dispenser B-826
Touch-free sensor detects user's hand to automatically dispense controlled amount (0.8ml) of soap; activation range is 4" (100mm) from sensor lens....
-
2.3.3 Issues
Other manufacturers may radiate less light energy from their emitters and depend upon the sensitivity and electronics of the receivers to detect an adequate signal....
-
Scoping [4.1.2(1), 4.1.3(1)] and Location [4.3.2]
Clear width, surface texture, running and cross slope, and the treatment of changes in level help determine the usability of walking surfaces by people with mobility impairments....
-
Slip Resistance
Compliance with the standards requires specifying surface materials, textures, or finishes that prevent or minimize slipperiness under the conditions likely to be found on the surface....
-
Cross Slope: ADA Standard Section 405.3
Section 405.3 covers the current ADA Standards for cross slope requirements on ramps.
