to assist the patient in standing....
Search Results "Ceiling Mounted Patient Lift"
Filters
Commonly Searched Documents
-
1. Standing Supports
-
206.6 Elevators
In a building or facility permitted to use the exceptions to 206.2.3 or permitted by 206.7 to use a platform lift, elevators complying with 408 shall be permitted. 2....
-
T502.2.1 Over-the-Road Buses
For over-the-road buses, the vertical clearance at doorways shall be 65 inches (1650 mm) minimum.
-
§ 38.125(b)(8) Platform entrance ramp
(8) Platform entrance ramp. The entrance ramp, or loading-edge barrier used as a ramp, shall not exceed a slope of 1:8, when measured on level ground, for a maximum rise of 3 inches,...
-
M303.2.2 Width
Wheelchair spaces shall be 36 inches (915 mm) wide minimum. EXCEPTION: Wheelchair spaces located on raised platforms shall be permitted to be 32 inches (815 mm) wide minimum to a...
-
M303.3.1 Vertical
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical.
-
M303.3.2 Beveled
Changes in level between ¼ inch (6.4 mm) high and ½ inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2.
-
M303.2.4 Equipment Clearances
Where wheelchair spaces are entered from the rear and includes space beneath components, wheelchair spaces shall include knee and toe clearances complying with M303.2.4.1 for breast...
-
M303.3.2 Beveled (Section-by-Section Analysis)
The MDE NPRM proposed that for equipment with a change in level at the entry to the wheelchair space, level changes greater than ¼ inch but not greater than ½ inch would be required...
-
M303.3.1 Vertical (Section-by-Section Analysis)
The MDE NPRM proposed that for equipment with a change in level at the entry to the wheelchair space, level changes of up to ¼ inch high are permitted to be vertical. This provision...
-
M303.2.4 Knee and Toe Clearance
Wheelchair spaces shall include knee and toe clearance complying with M303.2.4. The depth of the wheelchair space shall include knee and toe clearance of 17 inches (430 mm) minimum...
-
M303.2.4.1 Toe Clearance
Toe clearance shall be provided at a height of 9 inches (230 mm) above the floor to a depth of 6 inches (150 mm) maximum.
-
M303.3.1 Vertical
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical.
-
M303.3.2 Beveled
Changes in level between ¼ inch (6.4 mm) high and ½ inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2.
-
M303.2.4.2 Knee Clearance
Knee clearance shall be provided at a depth of 11 inches (280 mm) minimum and 25 inches (635 mm) maximum at 9 inches (230 mm) above the floor and at a depth of 8 inches (205 mm)...
-
Wheelchair Accessible Fishing Boat by Campion Marine
Video demonstration of Campion boat adapted for wheelchair user.
-
Campion Explorer 602 Center Console Adapted for Wheelchair User
Video demonstration of the Campion Explorer 602 Center Console adapted to load a wheelchair.
-
Inpro Corporation ENDURANT® Floor-to-Ceiling Mounted Partitions
standard for 25" to 37" widths Panels: up to 60" widths and 58" high Pilasters: 83" for partitions 3" - 24" wide and with overhead brace For ceiling...
-
Amenities
Pool lifts are required for pools and hot tubs. 1009.2.1 Pool Lift Location. Pool lifts shall be located where the water level does not exceed 48 inches. ...
-
M302.2.1 Adjustability (Section-by-Section Analysis)
The MDE NPRM proposed a transfer surface height range for diagnostic equipment used by patients in a seated position of 17 inches minimum and 19 inches maximum....
-
Horton Automatics Engineered with Purpose
Video describing engineering behind Horton Automatics products.
-
Horton Automatics Product Slideshow
Horton Automatics video slideshow of array of automatic door products.
-
Defining and Delivering Disability-Competent Care - Building a Disability-Competent Provider Network
This was the eighth webinar in Webinar Series #1, "Leading Healthcare Practices and Training: Defining and Delivering Disability-Competent Care". The objective of this webinar was to...
-
DOJ Compliance Highlights
Vans of 15 passengers or larger are required to have a lift. If you have smaller vans then you must contract with a company for use as needed....
