Bus boarding and alighting areas must be in compliance with the ADA-ABA Guidelines (Section 810.2), which address surfaces (sturdy), dimensions (96" long x 60" wide); connection to...
Search Results "Securement Device (Transportation)"
Commonly Searched Documents
-
Bus boarding and alighting areas
-
12185(a) Purposes
(a) Purposes The Office of Technology Assessment shall undertake a study to determine
-
§ 37.17 Designation of responsible employee and adoption of complaint procedures
[See subsections ...]
-
25. Need for Return Trip Assistance
A passenger with a disability may need assistance for a return trip when he or she did not need that assistance on the initial trip. For example, a dialysis patient may have no...
-
11B-810.9 Escalators
Where provided, escalators shall comply with the sections 6.1.3.5.6 and 6.1.3.6.5 of ASME A17.1 and shall have a clear width of 32 inches (813 mm) minimum. Exception: Existing...
-
State Certification that Plans have been Received
State Certification that Plans have been Received This is to certify that all ADA paratransit plans required under 49 CFR 37.139 have been received by (state...
-
11B-810.9 Escalators
Where provided, escalators shall comply with the sections 6.1.3.5.6 and 6.1.3.6.5 of ASME A17.1 and shall have a clear width of 32 inches (813 mm) minimum. Exception: Existing...
- Mino (BE2030)
- Maxi Pro (BE2021)
-
T201.1 General
covered by the Americans with Disabilities Act (ADA) shall comply with the requirements in the Non-Rail Vehicle Guidelines to the extent required by regulations issued by the Department of Transportation...
-
4.1.2(1)
(1) At least one accessible route complying with 4.3 shall be provided within the boundary of the site from public transportation stops, accessible parking spaces, passenger loading zones...
-
4.1.1(1)
(1) At least one accessible route complying with 4.3 shall be provided within the boundary of the site from public transportation stops, accessible parking spaces, passenger loading zones...
- Determining ADA Paratransit Eligibility An Approach, Recommendations and Training Materials
-
1002.6.1 Clear Floor or Ground Space
A clear floor or ground space complying with 305 shall be provided in the load and unload area adjacent to the transfer device....
-
1002.6.1 Clear Floor or Ground Space
A clear floor or ground space complying with 305 shall be provided in the load and unload area adjacent to the transfer device....
-
F206.2.8 Amusement Rides
Amusement rides required to comply with F234 shall provide accessible routes in accordance with F206.2.8. Accessible routes serving amusement rides shall comply with Chapter 4 except...
-
11B-206.2.9 Amusement rides
Amusement rides required to comply with Section 11B-234 shall provide accessible routes in accordance with Section 11B-206.2.9. Accessible routes serving Amusement Rides shall comply...
-
POLICIES, PROCEDURES AND PRACTICES
[See subsections ...]
-
206.2.9 Amusement Rides
Amusement rides required to comply with 234 shall provide accessible routes in accordance with 206.2.9. Accessible routes serving amusement rides shall comply with Chapter 4 except...
-
206.2.9 Amusement Rides
206.2.9 Amusement Rides. Amusement rides required to comply with 234 shall provide accessible routes in accordance with 206.2.9. Accessible routes serving amusement rides shall...
-
3.3.1. Captioning Hardware Scoping Requirements
According to industry research, a single unit of captioning hardware is required for each auditorium within a movie theater (Section 2.3). Therefore, the number of captioning...
-
11B-206.2.9 Amusement rides
Amusement rides required to comply with Section 11B-234 shall provide accessible routes in accordance with Section 11B-206.2.9. Accessible routes serving Amusement Rides shall comply...
-
11B-206.2.9 Amusement rides
Amusement rides required to comply with Section 11B-234 shall provide accessible routes in accordance with Section 11B-206.2.9. Accessible routes serving amusement rides shall comply...
-
11B-1002.6.1 Clear floor or ground space
A clear floor or ground space complying with Section 11B-305 shall be provided in the load and unload area adjacent to the transfer device....