Section 219 covers scoping requirements in the current ADA Standards for assistive listening systems.
Search Results "Patient Change Area"
Filters
Commonly Searched Documents
-
Assistive Listening Systems: ADA Standard Section 219
-
General: ADA Standard Section 219.1
Section 219.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for assistive listening systems.
-
11B-1008.2.6.2 Use zones
Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition).
-
Ground-Level Accessible Routes
The required 60-inch width enables two wheelchairs to pass each other or to change direction (below, bottom)....
-
4.3.11.1 Location and Construction
An area of rescue assistance shall be one of the following:...
-
F203.12 Animal Containment Areas
Animal containment areas that are not for public use shall not be required to comply with these requirements or to be on an accessible route....
-
203.12 Animal Containment Areas
Animal containment areas that are not for public use shall not be required to comply with these requirements or to be on an accessible route....
-
11B-223.1.1 Alterations
Where patient bedrooms or resident sleeping rooms are altered or added, the requirements of Section 11B-223 shall apply only to the patient bedrooms or resident sleeping rooms being altered...
-
11B-223.1.1 Alterations
Where patient bedrooms or resident sleeping rooms are altered or added, the requirements of Section 11B-223 shall apply only to the patient bedrooms or resident sleeping rooms being altered...
-
K1
Is there an accessible route, at least 36 inches wide, that connects each of the shelter activity areas with the food service and eating areas (it may narrow to 32 inches wide for up to...
-
5.7.1.2 Lift Compatibility Clearance in Base for Imaging Equipment
5.7.1.2 Lift Compatibility Clearance in Base for Imaging Equipment. An overhead lift may be used as an alternative option in lieu of the provisions for clearances in and around the...
-
Dispersion
Commenters with disabilities supported a requirement for dispersion of accessible sleeping rooms among all types of medical specialty areas, such as obstetrics, orthopedics, pediatrics,...
-
Location of Accessible Routes to Stages
Section 206.2.6 of the 2010 Standards requires the accessible route to directly connect the seating area and the accessible seating, stage, and all areas of the stage, where a circulation...
-
Definition [F106.5]
A viewing area is an outdoor space developed for viewing a landscape, wildlife, or other points of interest....
-
19. Are new play components added to an existing play area required to comply with the Standards even if there is not an accessible route from parking or the street to the play area?
Are new play components added to an existing play area required to comply with the Standards even if there is not an accessible route from parking or the street to the play area?...
-
F202.4 Alterations Affecting Primary Function Areas
The final rule adds Exception 2 to this section, which applies to altered areas containing a primary function....
-
1009.8.1.1 Visible communication method
[DSA-AC and HCD 1-AC] A button complying with Section 1138A.4 or Sections 11B-205 and 11B-309 in the area of refuge shall activate both a light in the area of refuge indicating that rescue...
-
Reese Enterprises, Inc. PERFEC MATv * Aluminum Hinge
They offer solid footing and abrasive surfaces, and they are available in a variety of materials and colors to complement any entry area....
-
M305.2.2.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M305.2.2.1 shall be 15 inches (380 mm) long minimum. Transfer supports shall be positioned along 13 ½ inches...
-
M305.2.4.1 Circular Cross Section
Transfer supports with circular cross sections shall have an outside diameter of 1 ¼ inches (32 mm) minimum and 2 inches (51 mm) maximum.
-
M305.2.1.2 Side Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.2 shall be capable of supporting transfer on each side of the transfer surface.
-
M305.2.1.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M302.2 shall be located on the short side (length) opposite the transfer side.
-
M305.2.2.2 Side Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.2 shall be 28 inches (710 mm) long minimum and shall be positioned along the width of transfer...
