Knee and toe clearance complying with 306 shall be provided....
Search Results "Knee Clearance"
-
902.2 Clear Floor or Ground Space
-
304.3.1 Circular Space
The space shall be permitted to include knee and toe clearance complying with 306....
-
902.2 Clear Floor or Ground Space
Knee and toe clearance complying...
-
11B-902.2 Clear floor or ground space
Knee and toe clearance complying with Section 11B-306 shall be provided....
-
11B-902.2 Clear floor or ground space
Knee and toe clearance complying with Section 11B-306 shall be provided....
-
11B-902.2 Clear floor or ground space
Knee and toe clearance complying with Section 11B-306 shall be provided....
-
306.3.2 Maximum Depth
Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (230 mm) above the finish floor or ground....
-
306.3.1 General
Space under an element between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground shall be considered knee clearance and shall comply with 306.3....
-
Fixed Seating and Tables
At least 27 inches of knee clearance must be provided between the floor and the underside of the table....
-
Attachment I
Both drinking fountains have spouts that are 33 3/4 inches above the finished floor and have knee clearances of 24 inches. ...
- Pilot Rock WXT and WXTH Picnic Table Using Lumber
- Pilot Rock WUT and WUTH Picnic Table Using Recycled Plastic
- Pilot Rock WUT and WUTH Picnic Table Using Formed Steel Channel
- Pilot Rock WXT and WXTH Picnic Table Using Recycled Plastic
- Pilot Rock WXT and WXTH Picnic Table Using Expanded Steel
- Pilot Rock WUT and WUTH Picnic Table Using Lumber
-
Recessed Objects
Elements, such as wheelchair accessible drinking fountains, must provide a knee clearance of at least 27”....
-
211 and 602 Drinking Fountains
The 1991 Standards require wall and post-mounted cantilevered drinking fountains mounted at a height for wheelchair users to provide clear floor space for a forward approach with knee and...
-
1. Abdomen depth (AD)
Univariate analysis The univariate analysis examines AD alone and is appropriate when no other clearance dimension is constrained or bounded (e.g., knee clearance height, foot clearance...
-
2.2.2 Structural Anthropometry (i.e. Body and WhMD Dimensions)
, Seat pan width 27 Knee Point Superior* (Apex patellae) Height: Maximum Height of Lower Leg, Knee Clearance Height 28 Knee Point Anterior* Length...
-
Exposed Pipes and Surfaces [4.19.4]
The P-trap may also be installed parallel to the wall so that it is located outside the knee/toe space....
-
Gripping Surface Cross Section and Clearances M301, M302, and M305.2
Gripping Surface Cross Section and Clearances M301, M302, and M305.2 Gripping surface for transfer supports shall be free of sharp or abrasive elements and shall have rounded edges per...
-
Reading and Study Areas [8.2]
Recommendation: Specifications in 4.32, including clear passage for accessible routes, knee clearances and surface height (34 inch maximum) should be considered for movable furnishings as...
-
Lavatory and Accessory Layout by Terry Salo, Architect, CASp
Lavatory and Accessory Layout by Terry Salo, Architect, CASp NOTE: The trash receptacle is preferred to be near the door to allow people to pull the door open with a paper...