HT Ad B Structural framea Including columns, girders, trusses 3b 2b 1 0 1 0 HT 1 0 Bearing walls...
Search Results "Back Wall"
Commonly Searched Documents
-
TABLE 601 FIRE-RESISTANCE RATING REQUIREMENTS FOR BUILDING ELEMENTS (hours)
-
903.3.1.1.1 Exempt locations
Generator and transformer rooms separated from the remainder of the building by walls and floor/ceiling or roof/ceiling assemblies having a fire-resistance rating of not less than 2 hours...
-
Accessible Pathway & Corridor: Minimum Clear Floor Space Required for 360-degree Turn
These data are based on measurements of wheeled mobility users performing 360-degree turns within an enclosed square space built with mock walls....
-
11B-608.2.1 Transfer type shower compartments
Clearance of 36 inches (914 mm) wide minimum by 48 inches (1219 mm) long minimum measured from the control wall shall be provided....
- Tork Elevation® Matic® Hand Towel Roll Dispenser with Intuition® Sensor, Black
-
804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
-
804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
-
Toilet Rooms-Banquet Area
The toilet centerline of the men's toilet room is 19" from the side wall instead of the required 18". See Standards § 4.16.2....
-
Furniture in Space with Clutter
Freestanding furniture is going to be just as much an issue to navigate through as the architectural walls and the space....
-
J1
If the drinking fountain is a wall-mounted unit, is there clear floor space at least 30 inches wide (36 inches if it is in an alcove) x 48 inches long in front of the drinking fountain and...
-
Protruding Objects [4.31.4]
Protruding Objects [4.31.4] Wall- or post-mounted pay phones and enclosures, due to their location above the standard sweep of canes (i.e., 27 inches high from the floor), can be a hazard...
-
Recessed Doors and Gates [§404.2.4.3]
Recessed Doors and Gates [§404.2.4.3] Thick walls, casework, shelving, columns and other elements can cause doors or gates to be recessed....
-
1133A.4.1, Item 4
Finished flooring shall be extended to the wall beneath the sink and work surface. Exceptions: 1....
-
11B-221.2.3.2 Vertical dispersion
When wheelchair spaces are dispersed vertically in an assembly facility they are placed at different locations within the seating area from front-to-back so that the distance from the screen...
-
Q6.) How important is the method of measurement in considering the tolerances allowable in finished construction?
Check back periodically for new information....
-
Entry Points and Seats
Consider design features like open sides, back supports, and hand supports (right) to help facilitate easy transfer and access....
-
Accessible Holes
The route in which a golfer with a disability must travel may not require travel back through any holes, even if the route is adjacent to the hole and not on the hole itself....
-
PDF (Adobe Acrobat Pro) implementation
For more guidance, see Agency specific information at the back of this document To add alt-text to an image, first determine the type of image in order to prepare the appropriate alt-text...
-
11B-1009.2.4 Seat
The seat shall be rigid and shall have a back support that is at least 12 inches (305 mm) tall....
-
11B-1009.2.4 Seat
The seat shall be rigid and shall have a back support that is at least 12 inches (305 mm) tall....
-
804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
-
Aquatic Recreation Facilities
access to the water is limited to one area and where everyone gets in and out at the same place, must provide at least one accessible means of entry, no matter how many linear feet of pool wall...