This section contains the technical requirements for the size (1018.8.1) and slope (1017.8.2) of resting intervals.
Search Results "Water Closet Grab Bar"
Commonly Searched Documents
-
1018.8 Resting Intervals
-
1018.8.1 Size
This section requires resting intervals to be 60 inches minimum by 60 inches minimum.
-
1018.8.1 Size
Resting intervals shall be 60 inches minimum (1525 mm) by 60 inches (1525 mm) minimum.
-
1018.8 Resting Intervals
Resting intervals shall comply with 1018.8.
-
F248.1.2 Beach Nourishment
Beach access routes shall be provided in a number complying with F248.2 where the entity that administers or manages a beach undertakes a beach nourishment project. EXCEPTION: The...
-
Master Bedroom
on metal lamps (master bedroom) Touch controls on automatic shades Telephone which amplifies high frequencies which are lost by many older people Pull down upper closet...
- Magnuson Group Wood Hospitality Coat Racks
- Magnuson Group TERTIO Wall Coat Racks
-
Delta Single Handle Pull-Down Bar/Prep Faucet with Touch2O Technology - Model 9959T-DST
Requires the Premium User plan or above. (Login or upgrade your account!)
-
1018.2 Connections
This section requires beach access routes to connect an entry point to the beach to the high tide level at tidal beaches; mean high water level at river beaches; and normal recreation water...
-
4.7.9.3 Height
Water spouts must be 28 inches (710 mm) minimum and 36 inches (915 mm) maximum above the ground or floor....
-
11B-602.3 Operable parts
The flow of water shall be activated by a manually operated system that is front mounted or side mounted and located within 6 inches (152 mm) of the front edge of the fountain or an automatic...
-
11B-602.3 Operable parts
The flow of water shall be activated by a manually operated system that is front mounted or side mounted and located within 6 inches (152 mm) of the front edge of the fountain or an automatic...
-
4.25.3 HEIGHT
Accessible storage spaces shall be within at least one of the reach ranges specified in 4.2.5 and 4.2.6. Clothes rods shall be a maximum of 54 in (1370 mm) from the floor (see Fig....
-
11B-233.3.1.2.6 Public housing facility site impracticality
ETA Editor's Note This section of the 2019 California Building Code was amended by the Division of the State Architect. The requirements in this section were previously found in...
-
4.7.3 Slope
The slope of the clear floor or ground spaces required by section 4.0 shall not exceed 1:48 (2 percent) in any direction. Exception. When the surface is not paved or is not...
-
1134A.8 Lavatories, vanities, mirrors and towel fixtures
Water supply and drain pipes under lavatories shall be insulated or otherwise covered to protect against contact. There shall be no sharp or abrasive surfaces under lavatories. 7. ...
-
2.1 General
ORARs shall connect the outdoor constructed features within each recreation site and shall connect to common use features such as toilets, showers, water spouts, trash or recycling receptacles...
-
F248.3 Location
Beach access routes shall coincide with or be located in the same area as pedestrian access points to the beach.
-
1018.7 Slopes
The slopes of beach access routes shall comply with 1018.7.
-
1018.6 Openings
Openings in the surface of beach access routes and resting intervals shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1018.6...
-
Dune Crossings [1018.10]
A dune crossing that is part of a beach access route and has a slope that exceeds 1:20 (5 percent) must also provide handrails that comply with section 505 of the ABA Standards and...
-
Facilities Serving Beaches [F248.1.1]
Beach access routes are required when an entity that administers or manages a beach constructs or alters any circulation paths, parking facilities, toilet facilities, or bathing...
-
Beach Nourishment [F248.1.2]
Beach access routes are required when the entity that administers or manages the beach undertakes a beach nourishment project. The entity is not required to spend more than 20...