Features and Benefits: Include trap and protectors Chrome-plated tubular brass and white pvc resin protectors Resist thermal transfer and are ADA compliant
Search Results "Lavatory Height"
-
Zurn Industries 1-1/4" P-Trap, Offset Strainer, and Protectors
-
Zurn Industries 1-1/4" P-Trap and Protectors
Features and Benefits: Include trap and protectors Chrome-plated tubular brass and white pvc resin protectors Resist thermal transfer and are ADA compliant
-
Delta Proximity Gooseneck HW-BB Recessed Box Trim Set SS 620TP3321TR-BB-SS
Product Features and Benefits 9.6″ (243mm) gooseneck spout, hardwire operated (battery option available) Proximity Sensing Technology - no visible sensor, the entire spout...
-
Delta Proximity Gooseneck HW-BB Recessed Box Trim Set SS 620TP3321TR-SS
Product Features and Benefits 9.6″ (243mm) gooseneck spout, hardwire operated (battery option available) Proximity Sensing Technology - no visible sensor, the entire spout...
-
Zurn Industries Combination Kit: One Trap Protector and One Supply Stop Protector
Features and Benefits: Satin white PVC resin 3/8" Nominal wall with vandal resistant clips ADA compliant and resists thermal transfer 3-year warranty
-
Zurn Industries 1-1/4" x 1-1/2" P-Trap, Offset Strainer, and Protectors
Features and Benefits: Include trap and protectors Chrome-plated tubular brass and white pvc resin protectors Resist thermal transfer and are ADA compliant
-
IPS Corporation Truebro® Lav Guard® 2 Undersink Piping Covers
Lav Guard® 2 E-Z series provides the durable, attractive, ADA- compliant undersink protection that the original Truebro Lav Guard® is famous for. Built-in E-Z Grip fasteners and...
-
McGuire Manufacturing Co., Inc. 155WC: Offset Lavatory Strainer
Furnished with heavy cast brass grid drain strainer, elbow and 1 1/4" 17GA seamless tubular offset tailpiece. ADA compliant. 8 3/4" x 5 1/8" OD.
-
9.5.2(2)(c)
for each gender or one unisex toilet room shall have a minimum clear door width of 32 in (815 mm), minimum turning space complying with 4.2.3, one water closet complying with 4.16, one lavatory...
-
Figure 407.2.3.1 Floor Designations on Jambs of Elevator Hoistway Entrances – Drawing from the U.S. Access Board
-
Attachment J
Lavatory Access to the required lavatory clear floor space is obstructed by a trash receptacle and paper towel dispenser; the height of the lavatory rim is 30 ½ inches...
-
Signage Requirements in the 2010 Standards for Accessible Design
The purpose of the SEGD 2012 ADA White Paper Update is to help the EGD community meet the spirit and intent of the new SAD accessible guidelines.
-
M305.2.3 Height
During use, the tops of transfer support gripping surfaces shall be 6 inches (150 mm) minimum and 19 inches (485 mm) maximum higher than the top of the associated uncompressed...
-
McGuire Manufacturing Co., Inc. ProDrainWC: Lavatory Strainer Less Overflow
Offset strainer less overflow. Furnished with heavy brass grid drain strainer, heavy brass elbow and 1 1/4" 17GA seamless tubular brass offset tailpiece.
-
11B-604.9 Water closets and toilet compartments for children's use
Water Closet Centerline 12 inches (305 mm) 12 to 15 inches (305 to 381 mm) 15 to 18 inches (381 to 457 mm) Toilet Seat Height...
-
11B-610.3 Shower compartment seats
A seat in a standard roll-in shower compartment shall be a folding type, shall be installed on the side wall adjacent to the controls, and shall extend from the back wall to a point...
-
A. Signs
A. If signs are provided for the following spaces, are the signs mounted on the wall (not the door) to the latch side of the door and centered 60" above the floor so that they can be...
-
11B-806.2.3.1 Personal lift device floor space
There shall be a clear space under the bed for the use of a personal lift device. The clear space shall extend under the bed parallel to the long side and be adjacent to an...
-
§ 38.95(b)(13) Handrails
(13) Handrails. Platforms on lifts shall be equipped with handrails, on two sides, which move in tandem with the lift which shall be graspable and provide support to standees...
-
11B-610.3 Shower compartment seats
11B-610.3 Shower compartment seats. A seat in a standard roll-in shower compartment shall be a folding type, shall be installed on the side wall adjacent to the controls, and shall...
-
§ 38.83(b)(6) Platform surface
(6) Platform surface. The lift platform surface shall be free of any protrusions over 1/4 inch high and shall be slip resistant. The lift platform shall have a minimum clear width of...
-
11B-806.2.3.1 Personal lift device floor space
There shall be a clear space under the bed for the use of a personal lift device. The clear space shall extend under the bed parallel to the long side and be adjacent to an...
-
11B-610.3 Shower compartment seats
A seat in a standard roll-in shower compartment shall be a folding type, shall be installed on the side wall adjacent to the controls, and shall extend from the back wall to a point...
-
11B-806.2.3.1 Personal lift device floor space
There shall be a clear space under the bed for the use of a personal lift device. The clear space shall extend under the bed parallel to the long side and be adjacent to an...
