The slope of the surface of the clear ground space shall not be steeper than 1:48 (2 percent) in any direction....
Search Results "Fire-Building Surface"
Filters
Commonly Searched Documents
-
5.1.8 Slope
-
1.1.5
Pervious concrete may also be considered for surfaces that are designed to be nearly level....
-
UltraPlay Engineered Wood Fiber Surface
It does not utilize any wood containing paint, chemicals or additives Has minimal bark and is free of twigs, leaf debris and other organic materials The most economical surfacing choice...
-
4.24.6 EXPOSED PIPES AND SURFACES
There shall be no sharp or abrasive surfaces under sinks....
-
11B-203.3 Raised areas
Areas raised primarily for purposes of security, life safety, or fire safety, including but not limited to, observation or lookout galleries, prison guard towers, fire towers or life guard...
-
7. Commit to Ongoing Maintenance of Accessible Playground Surfaces as a Responsibility of Ownership
surfaces....
-
11B-240.1 General
In existing play areas, where play components are relocated for the purposes of creating safe use zones and the ground surface is not altered or extended for more than one use zone, the...
-
4.24.6 Exposed Pipes and Surfaces
There shall be no sharp or abrasive surfaces under sinks....
-
203.9 Employee Work Areas
Spaces and elements within employee work areas shall only be required to comply with 206.2.8, 207.1, and 215.3 and shall be designed and constructed so that individuals with...
-
203.9 Employee Work Areas
203.9 Employee Work Areas. Spaces and elements within employee work areas shall only be required to comply with 206.2.8, 207.1, and 215.3 and shall be designed and constructed so...
-
Tile Tech Pavers® Coral-Pave™
Its irregular surface texture, defined in luxurious detail, was developed from actual sections of fossilized coral....
-
Allen Face F-Meter® Rolling Floor Profiler
The F-Meter® is the finest floor profiling instrument ever made. Pulled manually across the floor, the F-Meter® can measure up to 2500 linear feet (5,000 point elevation readings!)...
-
Abstract
Surfaces research project....
-
11B-1005.2.1 Height
At least 25 percent of the railings, guards, or handrails shall be 34 inches (864 mm) maximum above the ground or deck surface....
-
11B-1005.2.1 Height
At least 25 percent of the railings, guards, or handrails shall be 34 inches (864 mm) maximum above the ground or deck surface....
-
1133A.4.1, Item 4
Finished flooring shall be extended to the wall beneath the sink and work surface. Exceptions: 1....
-
Subpart F—Certification of State Laws or Local Building Codes (Section-by-Section Analysis)
For example, if a State agency that regulates buildings seeks certification of its building code, it should be able to do so, even if another State agency that regulates amusement rides...
-
(1) Site impracticality
The first test is an individual building test which involves a two-step process: measurement of the slope of the undisturbed site between the planned entrance and all vehicular or pedestrian...
-
Tile Tech Pavers® IPE Deck Tiles
IPE Deck Tiles are designed for constructing raised wood decks over exterior surfaces such as rooftops, terraces and plazas, in both residential and commercial applications....
-
Summary of Results
than the other trail segment surface materials....
-
1.1.6
1.1.6 Accessible surfaces should be as smooth as possible....
-
4.3.2(2)
(2) At least one accessible route shall connect accessible buildings, facilities, elements, and spaces that are on the same site....
-
215 Fire Alarm Systems
New: Scoping based on National Fire Protection Association (NFPA) 72 (1999 or 2002). 215.3 Employee Work Areas....
-
4.1.1(2)
(2) At least one accessible route complying with 4.3 shall connect accessible buildings, facilities, elements, and spaces that are on the same site....
