Search Results "Wheelchair Space (Transportation)"

• Federal Documents > Standards > 2010 ADA Standards
  Floor or Ground Surfaces: ADA Standard Section 304.2

  Section 304.2 covers the current ADA Standards for the ground surfaces of a turning space.

• Federal Documents > Standards > 1991 ADA Standards for Accessible Design
  10.3.2(5)

  commercial, retail, or residential facilities shall, to the maximum extent feasible, have an accessible route complying with 4.3 from the point of connection to boarding platforms and all transportation...

• State and Local Documents > Codes and Standards > 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017
  11B-218 Transportation facilities.

  [See subsections ...]

• State and Local Documents > Codes and Standards > 2019 California Standards
  11B-218 Transportation facilities

  [See subsections ...]

• State and Local Documents > Regulations > 36 CFR Part 1191 ADA and ABA Accessibility Guidelines for Emergency Transportable Housing Units
  106.5 Defined Terms, F106.5 Defined Terms

  The term is defined to mean a single or multiple section prefabricated structure that is transportable on a single transport vehicle and that can be set-up and installed on a temporary site...

• Federal Documents > Standards > 2010 ADA Standards
  Exterior Spaces: ADA Standard Section 806.2.2

  Exterior spaces, including patios, terraces and balconies, that serve the guest room shall be accessible. [S.H. 9.2.2(6)(d)]...

• Federal Documents > Technical Assistance > Guide to the ADA Standards
  Performance Areas

  route must connect stages and other performance areas directly to seating areas where they are directly connected by a circulation path as well as to dressing rooms and other ancillary spaces...

• Federal Documents > Regulations > 14 CFR Part 382 Nondiscrimination on the Basis of Disability in Air Travel (Air Carrier Access Act) (with amendments issued through May 2016)
  §382.129 What other requirements apply when passengers' wheelchairs, other mobility aids, and other assistive devices must be disassembled for stowage?

  [See subsections ...]

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  11B-234.3 Minimum number

  Amusement rides shall provide at least one wheelchair space complying with Section 11B-1002.4, or at least one amusement ride seat designed for transfer complying with Section 11B-1002.5...

• State and Local Documents > Codes and Standards > 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017
  11B-234.3 Minimum number

  Amusement rides shall provide at least one wheelchair space complying with Section 11B-1002.4, or at least one amusement ride seat designed for transfer complying with Section 11B-1002.5...

• State and Local Documents > Codes and Standards > 2019 California Standards
  11B-234.3 Minimum number

  Amusement rides shall provide at least one wheelchair space complying with Section 11B-1002.4, or at least one amusement ride seat designed for transfer complying with Section 11B-1002.5...

• Federal Documents > Technical Assistance > Title III Technical Assistance Manual (with 1994 supplement)
  III-7.5180 Assembly areas

  This section specifies the number of wheelchair seating spaces and types and numbers of assistive listening systems required in assembly areas. 1) Wheelchair seating: Requirements for...

• Federal Documents > Standards > 1991 ADA Standards for Accessible Design
  10.1 General

  Every station, bus stop, bus stop pad, terminal, building or other transportation facility, shall comply with the applicable provisions of 4.1 through 4.35, sections 5 through 9, and the...

• Rulemaking Process Documents > NPRMS > 28 CFR Part 35 Title II Notice of Proposed Rulemaking (NPRM) - Preamble (published 2008)
  Wheelchairs and other power-driven mobility devices.

  The basic Segway® model is a two-wheeled, gyroscopically stabilized, battery-powered personal transportation device. ...

• State and Local Documents > Laws > Americans with Disabilities Act (ADA) of 1990 (with amendments issued through 2008)
  12162(e)(2)(A)(ii)(I) Intercity rail

  (I) Intercity rail All stations in the intercity rail transportation system shall be made readily accessible to and usable by individuals with disabilities, including individuals who...

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M303.3.3.2 Cross Slope

  The cross slope of ramp runs shall not be steeper than 1:48.

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M303.3.3 Ramped

  Changes in level greater than ½ inch (13 mm) high shall be ramped and shall comply with M303.3.3.

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.8.1.2.4 Edge Protection on Platforms 1½ inches or less in Height

  5.8.1.2.4 Edge Protection on Platforms 1½ inches or less in Height. Edge protection is not required on platforms 1 ½ inches or less in height.

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.8.1.2.2 Single Ramped Entry - Edge Protection on the Platform and Platform Sides Recommendations

  5.8.1.2.2 Single Ramped Entry - Edge Protection on the Platform and Platform Sides Recommendations The Committee recommends a two-inch high edge protection on the back of the...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.8.1.2.1 Ramped Entry Slope

  5.8.1.2.1 Ramped Entry Slope. Raised platforms should have a ramp with slopes that do not exceed the following: Rise 0 to 1 ½ inches – 1:2 Slope Rise >1 ½ to 2 ½ inches – 1:8...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.8.1.2.3 Double Ramped Entry – Edge Protection on the Platform Sides

  5.8.1.2.3 Double Ramped Entry – Edge Protection on the Platform Sides. A minimum 2 inch high edge protection must be provided on both sides of the platform for double ramped entry...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.8.1.2.2 Single Ramped Entry – Edge Protection on the Platform and Platform Sides

  5.8.1.2.2 Single Ramped Entry – Edge Protection on the Platform and Platform Sides. A 2 inch high edge protection must be provided on the back of the platform, opposite the entry...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.8.1.2.4 Edge Protection on Platforms 1½ inches or less in Height Recommendations

  5.8.1.2.4 Edge Protection on Platforms 1½ inches or less in Height Recommendations The Committee recommends that no edge protection be required on platforms of 1½ inches or less...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.8.1.2.3 Double Ramped Entry - Edge Protection on the Platform sides Recommendations

  5.8.1.2.3 Double Ramped Entry - Edge Protection on the Platform sides Recommendations The Committee recommends a minimum two-inch high edge protection on both sides of the...