The vertical alignment of joints in concrete, asphalt, or board surfaces on trails can be tread obstacles....
Search Results "Vertical Standing Support"
Filters
Commonly Searched Documents
-
1017.5 Tread Obstacles
-
Edge Protection: ADA Standard Section 405.9
Section 405.9 covers the current ADA Standards for edge protection at ramps.
-
Slope Ratio
Slope Ratio—A ratio of vertical distance to horizontal distance or rise to run....
-
GameTime Merry-Go-All Play Component
x 18’ 11” Fall Height: 4’ Age Groups: 2 to 5 or 5 to 12 Years Merry-Go-All is a fully accessible, forward-facing inclusive spinning event for up to 12 passengers (4 seated, 8 standing...
-
Meridian Presenza Family Kiosk
Sleek, Simple Design The Presenza is meridian’s digital signage solution that supports large touch-screen technology. The simple design allows for flexible branding options....
-
The Dipstick® Floor Profiler Tool
for defined traffic aisles Can produce 3D maps of the floor surface 2 year warranty on all parts and labor - Never needs recalibrating Operation The Dipstick Floor Profiler stands...
-
Changes in Level and Horizontal Gaps
Also, requiring the 8 inch height would reduce the vertical travel distance for a lift....
-
11B-403.6 Handrails
Handrails provided in elevator cabs and platform lifts, referred to as support rails in the California Building Code, are not required to comply with the requirements for handrails on walking...
-
BUILDING
Any structure utilized or intended for supporting or sheltering any occupancy. Advisory Definition of BUILDING....
-
Registration Table
Place handouts at the front edge of the table to make them easier to reach for participants both seated and standing....
-
Accessible Routes to Press Boxes
Press boxes in assembly facilities are required to be on an accessible route except for certain bleacher-mounted and free-standing types....
-
221.9 Stadium Style Movie Theaters
at least one of the following criteria: (i) It is located within the rear 60% of the seats provided in an auditorium; or (ii) It is located within the area of an auditorium in which the vertical...
-
Is there a minimum distance between changes in level?
Such level changes may need to be in close proximity, such as at raised thresholds (otherwise a minimum 48” separation will provide enough wheelchair space so that only one vertical change...
-
ASME
Lifts are classified as: vertical platform lifts, inclined platform lifts, inclined stairway chairlifts, private residence vertical platform lifts, private residence inclined platform lifts...
-
1132A.4.1, Item 1
Thresholds with a change in height of not more than ¼ inch (6.35 mm) may be vertical....
-
1132A.4.1, Item 1
Thresholds with a change in height of not more than ¼ inch (6.35 mm) may be vertical....
-
Priority 1: Approach & Entrance
Word Fillable Form (1.5MB) Word Non-Fillable Form (1.3MB) PDF Non-Fillable Form (0.8MB)
-
4.35.5 Mirror
full-length mirror, measuring at least 18 in wide by 54 in high (460 mm by 1370 mm), shall be mounted in a position affording a view to a person on the bench as well as to a person in a standing...
-
7.2 SERVICE COUNTERS
Where service counters exceeding 36 in (915 mm) in height are provided for standing sales or distribution of goods to the public, an auxiliary counter or a portion of the main counter shall...
-
ACTIONS TO BE TAKEN BY THE STATE DEPARTMENT OF AGING
As of 2014, SDA is a stand-alone agency, and has begun to develop its own policies and procedures....
-
602.1 General (Section-by-Section Analysis)
602.1 General (Section-by-Section Analysis) This section proposes to require documentation supporting the use of ICT to conform to the requirements in the accompanying subsections concerning...
-
Location
Memorial Hospital of Iowa County, Dodgeville, WI, Nelson Tremain Partnership), it was intended to be used as a support for a standing individual during dressing and a swing away grab bar...
-
11B-810.2.3 Connection
shall provide a detectable transition between the boarding/alighting area and the roadway; the detectable transition shall consist of a curb with the face sloped at 35 degrees maximum from vertical...
-
E203.2 Agency Business Needs
How users with disabilities will perform the functions supported by the ICT; and b. How the ICT will be installed, configured, and maintained to support users with disabilities....
