Braille shall be separated 3/8 inch (9.5 mm) minimum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements....
Search Results "Uppercase Character (Visual)"
-
703.3.2 Position
-
11B-703.8.8 Line spacing
Low resolution VMS characters shall comply with Section 11B-703.5.9....
-
11B-703.8.10 Finish
The background of low resolution VMS characters shall have a non-glare finish....
-
11B-703.8.10 Finish
The background of low resolution VMS characters shall have a non-glare finish....
-
11B-703.8.8 Line spacing
Low resolution VMS characters shall comply with Section 11B-703.5.9....
-
11B-703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum and ½ inch (12.7 mm) maximum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements...
-
11B-703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum and ½ inch (12.7 mm) maximum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements...
-
11B-703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum and ½ inch (12.7 mm) maximum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements...
-
FCC Consumer Guide: Video Description
Video Description Video description is audio-narrated descriptions of a television program's key visual elements....
-
703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements. ...
-
D. Signage
Existing tactile signage will be relocated to between 48 inches measured to the baseline of the lowest tactile character and 60 inches measured to the baseline of the highest tactile character...
-
703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements....
-
11B-407.4.8.1.3 Floor arrival
As the car passes a floor and when a car stops at a floor served by the elevator, the corresponding character shall illuminate. Exception: Reserved....
-
DEL Motorized Wood Blind Do it Yourself Kit Installation Video
Visual wood blind installation demonstration....
-
11B-411.2.1.2.1 Keypads
Characters and symbols shall be centered on the corresponding button. The number five key shall have a single raised dot....
-
11B-411.2.1.2.1 Keypads
Characters and symbols shall be centered on the corresponding button. The number five key shall have a single raised dot....
-
III-7.5160 Alarms
Both audible and visual alarms are required when emergency warning systems are provided....
-
703.6.1 Pictogram Field
Characters and braille shall not be located in the pictogram field....
-
§8.3 Substantial impairment
Substantial impairment means a significant loss of the integrity of finished materials, design quality, or special character resulting from a permanent alteration....
-
5d.
Are raised letters and Braille characters used to identify each floor button and each control? [ADA Stds 4.10.12] Yes _____ No _____...
-
703.6.1 Pictogram Field
Characters and braille shall not be located in the pictogram field....
-
11B-705.1.1.3 Color and Contrast
The material used to provide visual contrast shall be an integral part of the surface. [2010 ADAS] 705.1.3 Contrast. ...
-
11B-705.1.1.3.2
11B-705.1.1.3.2 Detectable warning surfaces shall provide a 70 percent minimum visual contrast with adjacent walking surfaces....