A clear floor space complying with 305 shall be provided on each side of the bed. The clear floor space shall be positioned for parallel approach to the side of the bed....
Search Results "Pull Side"
Filters
Commonly Searched Documents
-
Clear Floor or Ground Space: ADA Standard Section 805.3
-
11B-604.8.2.3 Grab bars
A side-wall grab bar complying with Section 11B-604.5.1 shall be provided on both sides of the compartment....
-
Cubicles and Counters: ADA Standard Section 232.5.1
Section 232.5.1 covers scoping requirements in the current ADA Standards for cubicles and counters.
-
Section E: Route from Entrance
.) (§404.2.5) E12 On the pull side of each door, is there at least 18" of clearance provided to the side of the latch?...
-
11B-812.7.1 Location
Access aisles at vehicle spaces shall not overlap the vehicular way and may be placed on either side of the vehicle space they serve except for van accessible spaces which shall have access...
-
Bradley Towel Dispenser 252 Side Elevation
Requires the Premium User plan or above. (Login or upgrade your account!) -
11B-1005.3 Edge protection
pier or platform 12 inches (305 mm) where the 34 inch (865 mm) high railing is provided is an alternative design, permitting individuals using wheelchairs or other mobility devices to pull...
-
11B-231.4.1 Cubicles and counters
At least 5 percent, but no fewer than one, of cubicles shall comply with Section 11B-902 on both the visitor and detainee sides....
-
Beds: ADA Standard Section 807.2.3
Where beds are provided, clear floor space complying with 305 shall be provided on at least one side of the bed....
-
11B-404.2.9 Door and gate opening force
The force for pushing or pulling open a door or gate shall be as follows: [2010 ADA Standards] 404.2.9 Door and Gate Opening Force....
-
Corbin Russwin Inc. DC5000 Series Cam Action Door Closer
operating efficiency Slide track standard Adjustable spring size 1 through 6 Adjustable closing force Adjustable closing and latching speed Backcheck standard Non-handed Push or pull...
-
3.3.16 Door Use
Push Pull Push Pull Total Sample size Subtotal - completed the task ...
-
11B-232.5.1 Cubicles and counters
At least 5 percent, but no fewer than one, of cubicles shall comply with Section 11B-902 on both the visitor and detainee sides....
-
§382.65(c)(2)
(2) The chair must be designed to be compatible with the maneuvering space, aisle width, and seat height of the aircraft on which it is to be used, and to be easily pushed, pulled, and turned...
-
Must operable parts be usable with a closed fist?
Many types of operable parts, such as pull handles, satisfy the requirements even though they may not be operable with a closed fist....
-
11B-807.2.3 Beds
Where beds are provided, clear floor space complying with Section 11B-305 shall be provided on at least one side of the bed....
-
Location: ADA Standard Section 604.9.1
Section 604.9.1 covers the current ADA Standards for the mounting location of children's use water closets.
-
11B-604.9.1 Location
The water closet shall be located with a wall or partition to the rear and to one side....
-
Lavatory & Accessory Layouts
The trash receptacle is preferred to be near the door to allow people to pull the door open with a paper towel and drop it into the receptacle before exiting....
-
Door and Gate Opening Force: ADA Standard Section 404.2.9
Section 404.2.9 covers the current ADA Standards for door and gate opening force.
-
ELKAY Filtered EZH2O® Bottle Filling Station with Integral Soft Sides® Fountain LZWS-EDFP217K Side Elevation
Requires the Premium User plan or above. (Login or upgrade your account!) -
Forward Reach [4.2.5]
Since the forward reach over an obstruction is limited by how far a person using a wheelchair can pull up below it, the depth of reach cannot exceed the amount of usable clear floor space...
-
Horizontal Dispersion: ADA Standard Section 221.2.3.1
Section 221.2.3.1 covers scoping requirements in the current ADA Standards for horizontal Dispersion in assembly areas.
-
11B-604.8.1.4 Toe clearance
At least one side partition shall provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond the compartment-side face of the partition...
