Ramps with drop offs ½ inch (13 mm) or greater shall provide edge protection 2 inches (50 mm) high minimum on each side....
Search Results "Non-Positive Shut Off"
Commonly Searched Documents
-
M303.3.3.4 Edge Protection
-
Are requirements for protruding objects limited to hallways and corridors?
No, requirements for protruding objects apply to all circulation paths, including those in rooms and spaces off corridors. They apply to both interior and exterior circulation paths....
-
Edge Protection [4.8.7]
Curbs (or walls) are effective in keeping both wheelchairs and crutch-tips from slipping off the edge or getting caught on vertical posts....
- GE® 30" Slide-In Electric Convection Range JS750EFES
-
11B-231.4.1 Cubicles and counters
Exception: The detainee side of cubicles or counters at non-contact visiting areas not serving holding cells required to comply with Section 11B-231 shall not be required to comply with...
-
Clear Floor or Ground Space: ADA Standard Section 902.4.1
A clear floor space complying with 305 positioned for forward approach shall be provided....
-
F209.5 Mechanical Access Parking Garages
Mechanical access parking garages shall provide at least one passenger loading zone complying with 503 at vehicle drop-off and vehicle pick-up areas....
-
209.5 Mechanical Access Parking Garages
Mechanical access parking garages shall provide at least one passenger loading zone complying with 503 at vehicle drop-off and vehicle pick-up areas....
-
§ 38.23(c)(4) Ramp barriers
Each side of the ramp shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
"Light Duty" Jobs
Creating such positions by job restructuring is not required by the ADA....
-
Section 37.167 Other Service Requirements
This means that any time a vehicle is to stop where a passenger can get off and transfer to another bus or rail line (or to another form of transportation, such as commuter rail or ferry...
-
11B-1005.3 Edge protection
Edge protection will prevent wheelchairs or other mobility devices from slipping off the fishing pier or platform....
-
Mounting Location and Height [4.30.6]
The 60 inch centerline height also provides uniformity as well as convenience in reading signs from a standing position....
-
Location: ADA Standard Section 703.4.2
that a clear floor space of 18 inches (455 mm) minimum by 18 inches (455 mm) minimum, centered on the tactile characters, is provided beyond the arc of any door swing between the closed position...
-
11B-1004.1 Clear floor space
Exercise machines and equipment shall have a clear floor space complying with Section 11B-305 positioned for transfer or for use by an individual seated in a wheelchair....
-
Sloped Entries: ADA Standard Section 1009.3
Providing an aquatic wheelchair made of non-corrosive materials and designed for access into the water will protect the water from contamination and avoid damage to personal wheelchairs...
-
11B-232.5.1 Cubicles and counters
Exception: The inmate or detainee side of cubicles or counters at non-contact visiting areas not serving holding cells or housing cells required to comply with Section 11B-232 shall not...
-
T603.2 Orientation
Wheelchair securement systems shall secure the wheelchair so that the occupant faces the front of the non-rail vehicle....
-
T404.3 Ramps and Bridgeplates
Where the space between the floor of non-rail vehicles and a boarding platform is greater than 2 inches (51 mm) horizontally or 5/8 inch (16 mm) vertically when measured at 50 percent passenger...
- Cybex Total Access Recumbent Bike
-
18. Does an employer have to hold open an employee's job as a reasonable accommodation?
An employee with a disability who is granted leave as a reasonable accommodation is entitled to return to his/her same position unless the employer demonstrates that holding open the position...
-
Reassignment
Therefore, the employee is not qualified for this position....
-
11B-703.8.9 Height above floor
Low resolution VMS characters shall be 40 inches (1016 mm) minimum above the floor of the viewing position, measured to the baseline of the character....
-
11B-804.6.2 Operable parts
Bottom-hinged appliance doors, when in the open position, shall not be required to comply with Section 11B-309.3....