The clearance between the platform sill and the edge of any runway landing shall be 1¼ inch (32 mm) maximum....
Search Results "Maximum Extent Practicable"
-
11B-410.4 Platform to runway clearance
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
-
11B-410.4 Platform to runway clearance
The clearance between the platform sill and the edge of any runway landing shall be 1¼ inch (32 mm) maximum....
-
Stroke Thickness: ADA Standard Section 703.5.7
Stroke thickness of the uppercase letter “I” shall be 10 percent minimum and 30 percent maximum of the height of the character....
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
-
Section 36.405 Alterations: Historic Preservation (Preamble, Section-by-Section Analysis)
The Department agrees with these comments to the extent that they suggest that the language of the rule should conform to the language employed by Congress in the ADA....
-
Section 36.405 Alterations: Historic Preservation (Section-By-Section Analysis and Response to Comments)
The Department agrees with these comments to the extent that they suggest that the language of the rule should conform to the language employed by Congress in the ADA....
-
A. Employment Generally
Recipients may not engage in any employment practice that discriminates against any employee or applicant for employment on the basis of sex or handicap....
-
Section 1630.2(j)(1)(i) Broad Construction; not a Demanding Standard
(i) Broad Construction; not a Demanding Standard Section 1630.2(j)(1)(i) states: “The term ‘substantially limits’ shall be construed broadly in favor of expansive coverage, to the maximum...
-
1. Under Title II, what must public school districts do to provide effective communication to students with hearing, vision, or speech disabilities?
However, the school still has an obligation to provide, to the maximum extent possible, an effective auxiliary aid or service.22 These concepts are discussed in greater detail below....
-
A. Title III of the ADA and its Implementing Regulations
Discrimination includes a failure to design or construct facilities, or make alterations to the maximum extent feasible, that are “readily accessible to and usable by individuals with disabilities...
-
Sec.36.304(g)(3)
(3) This section does not apply to rolling stock and other conveyances to the extent that Sec.36.310 applies to rolling stock and other conveyances....
-
A4.1.6(1)(h)
A4.1.6(1)(h) When an entrance is being altered, it is preferable that those entrances being altered be made accessible to the extent feasible....
-
Accessible Routes: ADA Standard Section 1007.2
Where accessible routes intersect playing surfaces of holes, a 1 inch (25 mm) maximum curb shall be permitted for a width of 32 inches (815 mm) minimum. 3....
-
11B-504.5 Nosings
The radius of curvature at the leading edge of the tread shall be ½ inch (12.7 mm) maximum....
-
11B-809.10.5.2 Reinforcement for grab bars
At the control end wall and head end wall, between 30 inches (762 mm) maximum to 38 inches (965 mm) minimum above the finish floor, extending 28 inches (711 mm) minimum from the front edge...
-
11B-504.5 Nosings
The radius of curvature at the leading edge of the tread shall be ½ inch (12.7 mm) maximum....
-
11B-809.10.5.2 Reinforcement for grab bars
At the control end wall and head end wall, between 30 inches (762 mm) maximum to 38 inches (965 mm) minimum above the finish floor, extending 28 inches (711 mm) minimum from the front edge...
-
11B-609.4 Position of grab bars
Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except...
-
11B-609.4 Position of grab bars
Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except...
-
Platform to Hoistway Clearance: ADA Standard Section 407.4.3
Section 407.4.3 covers the current ADA Standards for the required clearance between the elevator car platform and the hoistway landing.
-
11B-407.4.3 Platform to hoistway clearance
The clearance between the car platform sill and the edge of any hoistway landing shall be 1¼ inch (32 mm) maximum....
-
11B-407.4.3 Platform to hoistway clearance
The clearance between the car platform sill and the edge of any hoistway landing shall be 1¼ inch (32 mm) maximum....
-
11B-809.9.5 Lower shelving
Lower shelving and/or drawer space shall be provided at a height of 48 inches (1219 mm) maximum above the finish floor....