Signs required by Chapter 10, Section 1009.11 to provide instructions in areas of refuge shall comply with Section 11B-703.5. Signs required by Chapter 10, Section 1009.9 at doors to...
Search Results "Identification (Parking Signage)"
-
11B-216.4.2 Areas of refuge and exterior areas for assisted rescue
-
11B-216.4.2 Areas of refuge and exterior areas for assisted rescue
Signs required by Chapter 10, Section 1009.11 to provide instructions in areas of refuge shall comply with Section 11B-703.5. Signs required by Chapter 10, Section 1009.9 at doors to...
-
R309.4 Curb Ramps or Blended Transitions
At parallel parking spaces, curb ramps and blended transitions should be located so that a van side-lift or ramp can be deployed to the sidewalk and the vehicle occupant can transfer to...
-
1012.4 Surface
The surface of parking spaces and pull-up spaces shall be firm and stable....
-
1012.4 Surface
The surface of parking spaces and pull-up spaces shall be firm and stable....
-
11B-406.5.1 Location
Curb ramps and the flared sides of curb ramps shall be located so that they do not project into vehicular traffic lanes, parking spaces, or parking access aisles....
-
11B-406.5.1 Location
Curb ramps and the flared sides of curb ramps shall be located so that they do not project into vehicular traffic lanes, parking spaces, or parking access aisles....
-
11B-406.5.1 Location
Curb ramps and the flared sides of curb ramps shall be located so that they do not project into vehicular traffic lanes, parking spaces, or parking access aisles....
-
C1-a
Is an accessible route provided from accessible parking spaces to the accessible entrance of the shelter? [ADA Standards § 4.1.2(1), 4.3] Yes No...
-
Question 17
YES/NO 17. Are the signs for the accessible restrooms and fitting rooms still readable and mounted next to the latch side of the door, at 5 feet to...
-
Character Height [4.30.3]
Character Height [4.30.3] Characters must be sized according to the viewing distance although a minimum 3 inch upper case or capital letter height is required for overhead signs...
-
3.2.1 General
Vehicle parking spaces shall comply with section 3.1....
-
Seton Directional Signs - Accessible Route with ISA and Arrow
Each sign is carefully engraved with the ISA symbol Setonply® is a tough, stain-resistant multi-layered acrylic and cleans easily with a damp cloth 12"W x 4"H signs are...
-
Signaids Floor Numbering and Stair Shaft Designation-Style 2
FLOOR NUMBERING & STAIR SHAFT DESIGNATION - Braille and Tactile Style 2 - 240mm x 240mm - Gr. 1 Braille and Tactile sign - AODA Compliant (Canada) -...
-
Signaids Floor Numbering and Stair Shaft Designation-Style 1
FLOOR NUMBERING & STAIR SHAFT DESIGNATION - Braille and Tactile Style 1 - 190mm x 130mm - Gr. 1 Braille and Tactile sign - AODA Compliant (Canada) - Available in 3...
-
1012.5 Slope
The slope of the surface of parking spaces and pull-up spaces shall not be steeper than 1:48 in any direction....
-
4.30.4* Raised and Brailled Characters and Pictorial Symbol Signs
4.30.4* Raised and Brailled Characters and Pictorial Symbol Signs (Pictograms). Letters and numerals shall be raised 1/32 in, upper case, sans serif or simple serif type and shall be...
-
4.30.4* RAISED CHARACTERS OR SYMBOLS
Letters and numbers on signs shall be raised 1/32 in (0.8 mm) minimum and shall be sans serif characters. Raised characters or symbols shall be at least 5/8 in (16 mm) high, but no...
-
On existing locations when we add an EV station as van accessible how do we address taking two spaces from the facility (losing a space) and then not having the mandatory spaces remaining for the facility?
Parking ordinances are typically adopted within each city and county in California....
-
11B-703.6 Pictograms
Pictograms shall comply with Section 11B-703.6. Advisory 11B-703.6 Pictograms. Pictograms and other symbols, such as the International Symbol of Accessibility (ISA), which are...
-
703.7.2 Symbols
703.7.2 Symbols
-
703.6 Pictograms
Pictograms shall comply with 703.6.
-
R410.7 Height from Finish Surface
R410.7 Height from Finish Surface. Visual characters shall be 1.0 m (3.25 ft) minimum above the finish surface.
