shall be permitted to have a portion which is 24 inches (610 mm) long minimum complying with 904.4.1 provided that the required clear floor or ground space is centered on the accessible length...
Search Results "Full Length Mirror"
-
904.4 Sales and Service Counters
-
904.4.1 Parallel Approach
A clear floor or ground space complying with 305 shall be positioned for a parallel approach adjacent to the 36 inch (915 mm) minimum length of counter....
-
407.12.3.1 Unobstructed Forward Reach (Section-by-Section Analysis)
An unobstructed forward reach, for purposes of this section, occurs when the operable part is located at the leading edge of the maximum protrusion within the length of the vertical reference...
-
A4.8.2 SLOPE AND RISE
The ability to manage an incline is related to both its slope and its length....
-
§ 38.23(b)(6) Platform surface
clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the platform surface to 30 inches above the platform, and a minimum clear length...
-
11B-405.9.2 Curb or barrier
To prevent wheel entrapment, the curb or barrier shall provide a continuous and uninterrupted barrier along the length of the ramp....
-
§ 38.83(b)(6) Platform surface
clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the lift platform surface to 30 inches above the surface, and a minimum clear length...
-
§ 38.125(b)(6) Platform surface
clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the lift platform surface to 30 inches above the surface, and a minimum clear length...
-
§ 38.95(b)(6) Platform surface
clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the lift platform surface to 30 inches above the surface, and a minimum clear length...
-
11B-405.9.2 Curb or barrier
To prevent wheel entrapment, the curb or barrier shall provide a continuous and uninterrupted barrier along the length of the ramp....
-
Bobrick Recessed Sharp Disposal B-35016
Door equipped with full-length stainless steel piano-hinge at bottom; swings down for easy replacement of sharps container....
-
AJW Architectural Products U852 Dual Stall Seat Cover Dispenser - Partition Mounted
Hinge: Full length stainless steel piano type hinge. Lock: Pin tumbler, commercial quality keyed like all other AJW accessories....
-
Bobrick Surface-Mounted Sharp Disposal B-350169
Door equipped with full-length stainless steel piano-hinge at bottom; swings down for easy replacement of sharps container....
-
AJW Architectural Products U592 1.6 Gallon Sanitary Napkin Disposal w/ Keyed Access Panel & Mounted Shelf - Surface Mounted
Hinges: Heavy duty, full length, stainless steel piano type hinges. Lock: Commercial quality keyed like all other AJW cabinets....
-
AJW Architectural Products U593 1.6 Gallon Sanitary Napkin Disposal w/ Mounted Shelf - Surface Mounted
Hinge: Heavy duty, full length, stainless steel piano type hinge. Shelf: Fabricated of #22 ga stainless steel with 1/2" bends, hemmed and ground smooth....
-
AJW Architectural Products U852H Dual Stall Seat Cover Dispenser w/ Flush Mounting - Partition Mounted
Hinge: Full length stainless steel piano type hinge. Lock: Pin tumbler, commercial quality keyed like all other AJW accessories....
-
Gangway Slope and Rise Exceptions
As a minimum however, gangways must be designed to provide for a maximum 1:12 (8.33%) slope but are not required to be longer than 80 feet in length....
-
ASME
The enclosure walls not used for entry or exit are required to have a grab bar the full length of the wall on platform lifts....
-
Alteration
restoration, resurfacing of circulation paths or vehicular ways, changes or rearrangement of structural parts or elements, and changes or rearrangement in the plan configuration of walls and full-height...
-
106.5.5 Alteration
restoration, resurfacing of circulation paths or vehicular ways, changes or rearrangement of the structural parts or elements, and changes or rearrangement in the plan configuration of walls and full-height...
-
Existing Trailheads [F202.3]
If the circulation path at a trailhead is altered and a condition for exception does not permit full compliance with a specific provision in the technical requirements for ORARs, the circulation...
-
D. Plain Language Instructions
In any regulation, there is a tension between drafting language that is simple and straightforward and drafting language that gives full effect to issues of legal interpretation....
-
11B-812.1 General
Exception: Where vehicle spaces or access aisles are not adjacent to another vehicle space, access aisle, or parking space, measurements shall be permitted to include the full width of the...
-
§ 37.5(f)
entities that are primarily engaged in the business of transporting people and whose operations affect commerce shall not discriminate against any individual on the basis of disability in the full...
