., elements for which there are neither technical nor scoping specifications in the 1991 Standards), and therefore those elements must be modified to the extent readily achievable to comply...
Search Results "Feasibility (Technical, Infeasible, Structural, Maximum Extent)"
-
§ 36.304(d)(2)(iii)
-
Appendix to §36.304(d) Compliance Dates and Applicable Standards for Barrier Removal and Safe Harbor
Applicable Standard Before March 15, 2012 Elements that do not comply with the requirements for those elements in the 1991 Standards must be modified to the extent...
- Besam SL500 Surface Mount Automatic Sliding Door
-
2. Standing Supports
The proposed rule provided technical criteria for vertical and horizontal standing supports....
-
§104.34(b) Nonacademic settings
the services and activities set forth in §104.37(a)(2), a recipient shall ensure that handicapped persons participate with nonhandicapped persons in such activities and services to the maximum...
-
III-4.4600 Seating in assembly areas
for alterations, public accommodations engaged in barrier removal are not required to disperse wheelchair seating in assembly areas with 300 or fewer seats, or in any case where it is technically...
-
Trailhead Signs
the signs to include information on the total distance of the trail and, where exceptions have been used, the location of the first point where the trail does not fully comply with the technical...
-
NAADAC Webinar Series: "ADA: The Next Generation" - Virtual and At-Home Training
This unique and important series of seven webinars brings together some of the country’s most experienced ADA experts and trainers, combining the “official” view with practical...
-
Is vertical access required to all levels of a parking garage?
Levels of open parking structures that do not contain occupiable space are not considered “stories” under the Standards....
-
810.5.3 Platform and Vehicle Floor Coordination--Modification to 810.5.3 of Appendix D to 36 CFR Part 1191
In light rail, commuter rail, and intercity rail systems where it is not operationally or structurally feasible to meet the horizontal gap or vertical difference requirements of part 1192...
-
11B-608.7 Thresholds
Thresholds in roll-in type shower compartments shall be ½ inch (13 mm) high maximum in accordance with 303....
-
11B-608.7 Thresholds
Thresholds in roll-in type shower compartments shall be ½ inch (13 mm) high maximum in accordance with 303....
-
C101.1 Purpose
These Revised 255 Guidelines, which consist of 255 Chapters 1 and 2 (Appendix B), along with Chapters 3 through 7 (Appendix C), contain scoping and technical requirements for the design,...
-
C101.1 Purpose
These 255 Guidelines, which consist of 255 Chapters 1 and 2 (Appendix B), along with Chapters 3 through 6 (Appendix C), contain scoping and technical requirements for the design, development...
-
Camp Shelters
Camp shelters are small structures typically enclosed on three sides with a roof or overhang. They are often located on trails....
-
10.4.1(2)
(2) The circulation path, including an accessible entrance and an accessible route, for persons with disabilities shall, to the maximum extent practicable, coincide with the circulation...
-
§27.75(a)(3)(ii)
(ii) It would be infeasible for mobility-limited persons to reach the over-passes, under-passes or ramps because of unusual topographical or architectural obstacles unrelated to the federally...
-
Reorganization of Chapters on Transportation Facilities and Residential Facilities
The proposed rule, consistent with the advisory committee’s recommendations, minimized classifications and structural delineations in the guidelines based on facility or occupancy type....
-
Height
The Access Board is considering whether 6 inches minimum and 19 inches maximum above the transfer surface would be an appropriate height for transfer supports on diagnostic equipment used...
-
When alterations are made on an upper story of a facility, is vertical access required?
If an alteration includes installation of a stair or escalator where none existed previously and involves major structural modifications, an accessible route between levels served by the...
-
Architecting High-Converting Interfaces for Professional Services
These hubs should intuitively integrate comprehensive case studies, highly technical whitepapers, and specific partner biographies directly relevant to that particular service line....
-
F239.2 Minimum Number
If a course is designed with the minimum 50 percent accessible holes, designers or operators are encouraged to select holes which provide for an equivalent experience to the maximum extent...
-
§ 38.113(a)(2)
(2) Doorways at ends of cars connecting two adjacent cars, to the maximum extent practicable in accordance with regulations issued under the Federal Railroad Safety Act of 1970 (49 CFR parts...
-
239.2 Minimum Number
If a course is designed with the minimum 50 percent accessible holes, designers or operators are encouraged to select holes which provide for an equivalent experience to the maximum extent...