Corada

Figure 406.6 Diagonal or Corner Type Curb Ramps – Drawing from the U.S. Access Board

Ramps shall have level landings at bottom and top of each ramp and each ramp run. Landings shall have the following features:...

Accessible Parking Spaces for Cars

Accessible parking spaces for cars have at least a 60-inch-wide access aisle located adjacent to the designated parking space....

4.10.12(2)

Figure 23 Car Controls...

5 [§ 4.7.2]

5 [§ 4.7.2] The transitions on and off the curb ramp are the points where the gutter meets the bottom of the ramp and where the top of the ramp meets the sidewalk....

Madden Manufacturing Round Handrail (ADA Compliant)

Contractor ADA Handrail is an innovator in mechanical ADA fittings and systems. Available in kit form or full length extrusions, each system is carefully designed and packaged to...

EZ-ACCESS Transitions® Modular Entry Mat

The Transitions® Modular Entry Mat is a portable rubber threshold mat which is made of 100% recycled rubber and can easily be trimmed or notched to fit various entryway heights. It...

PromenAid Handrail System

This handrail is a thing of beauty, but to truly understand its appeal you have to hold one for yourself. Solid, substantial, with a full grip and comfortable feel, PromenAid exceeds...

EZ-ACCESS Transitions® Angled Entry Mat

Transitions® Angled Entry Mat – is accommodating for doorways inside and outside. It does not interfere with the door track and works especially well with sliding glass doors. It is...

EZ-ACCESS Transitions® Angled Entry Plate

Transitions® Angled Entry Plate – A portable stand-alone threshold plate with a slip-resistant surface which offers superior traction in varying conditions. This single-piece, formed...

Hollaender Manufacturing Company ADA Railing Systems

Our ADA railing systems are fully compliant with the Americans with Disabilities Act, and UFAS codes. They’re easy-to-install and made of corrosion resistant aluminum. All...

Practice Putting Greens, Practice Teeing Grounds, and Teeing Stations at Driving Ranges: ADA Standard Section 238.3

Section 238.3 covers scoping requirements in the ADA Standards for practice putting greens, practice teeing grounds, and teeing stations at driving ranges.

11B-238.3 Practice putting greens, practice teeing grounds, and teeing stations at driving ranges

At least 5 percent, but no fewer than one, of practice putting greens, practice teeing grounds, and teeing stations at driving ranges shall be designed and constructed so that a golf car...

11B-238.3 Practice putting greens, practice teeing grounds, and teeing stations at driving ranges

At least 5 percent, but no fewer than one, of practice putting greens, practice teeing grounds, and teeing stations at driving ranges shall be designed and constructed so that a golf car...

§ 38.95(a)(1) General

All new commuter rail cars, other than level entry cars, covered by this subpart shall provide a level-change mechanism or boarding device (e.g., lift, ramp or bridge plate) complying with...

11B-407.4.6.2.2 Arrangement

Buttons shall be arranged with numbers in ascending order. When two or more columns of buttons are provided they shall read from left to right.

11B-411.4.7.4 Button spacing

Button spacing shall comply with Section 11B-407.4.7.1.5.

11B-407.4.6.2.1 Size and shape

Buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in their smallest dimension and be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...

11B-411.4.7.1 Type

Control button type shall comply with Section 11B-407.4.7.1.1.

407.4.6.2.1 Size

Buttons shall be ¾ inch (19 mm) minimum in their smallest dimension.

407.4.6.2.2 Arrangement

Buttons shall be arranged with numbers in ascending order. When two or more columns of buttons are provided they shall read from left to right.

407.4.6.2.1 Size

Buttons shall be 3/4 inch (19 mm) minimum in their smallest dimension.

407.4.6.2.2 Arrangement

Buttons shall be arranged with numbers in ascending order. When two or more columns of buttons are provided they shall read from left to right.

407.4.6.2.1 Size

407.4.6.2.1 Size. Buttons shall be ¾ inch (19 mm) minimum in their smallest dimension.