keypad similar to a telephone keypad containing a raised dot with a dot base diameter between 1.5 mm and 1.6 mm and a height between 0.6 mm and 0.9 mm on the number 5 key that enables a visually...
Search Results "Visual Indicator (Alarm)"
Filters
Commonly Searched Documents
-
11B-707.9.1.1 Tactilely discernible numerical keypad
-
105.2.2 ASME
A visual indication acknowledging the establishment of a communications link to authorized personnel must be provided....
-
105.2.2 ASME
A visual indication acknowledging the establishment of a communications link to authorized personnel must be provided....
-
Accessible
For example, a pager that has both audio and visual controls for inputting information, as well as both audio and visual methods for retrieving messages, would be accessible to a person...
-
4.10.12(3)
Emergency controls, including the emergency alarm and emergency stop, shall be grouped at the bottom of the panel and shall have their centerlines no less than 35 in (890 mm) above the floor...
-
Section 36.303(g)(1) Audio Description
“Audio Description” In the NPRM, the Department used the term “audio description” to refer to the spoken description of information describing the visual elements of a movie to an individual...
-
Issue 8: Rest-in-WALK (quiet time ok)
Issue 8: Rest-in-WALK (quiet time ok) In some locations, the pedestrian signals ‘rest-in-WALK’ and it may not be desirable to have the WALK indication repeat constantly during the long...
-
§382.69(a)
(a) As a carrier, you must ensure that all new videos, DVDs, and other audio-visual displays played on aircraft for safety purposes, and all such new audio-visual displays played on aircraft...
-
Fixed position maps and kiosks
Fixed position maps and kiosks Tactile maps can also be mounted on walls and pedestals in locations where visually impaired individuals will be likely to find and identify them....
-
203.9 Employee Work Areas
Employee work areas are also subject to requirements that facilitate the provision of visual alarms....
-
Appendix: Checklist for APR Installations
Check the height of the pushbutton Check the tactile arrow to be sure it is in line with crosswalk Confirm proper functioning of the audible WALK indication Confirm proper functioning...
-
DSA IR 11B-2: BEVELED LIP AT CURB RAMPS (with revisions issued through Jan. 2011)
This IR indicates an acceptable method for achieving compliance with applicable codes and regulations, although other methods proposed by design professionals may be considered by DSA....
-
Verify Electrical
Measure to top or bottom of boxes 11B-308.1.2 Alarm/detector systems. 11B-702 Height of HVAC controls....
-
Security Bollards [7.4] and Security Devices
For example, gates allowing wheelchair access cannot be locked or alarmed during times when the general public has unhindered access to the facility....
-
Verify Electrical
Measure to top or bottom of boxes 11B-308.1.2 Alarm/detector systems. 11B-702 Height of HVAC controls....
-
Time Management
Divide large assignments into several small tasks Set a timer to make an alarm after assigning ample time to complete a task Provide a checklist of assignments Supply an electronic...
-
407.2.1.5 Signals
Call buttons shall have visible signals to indicate when each call is registered and when each call is answered. EXCEPTIONS: 1....
-
407.2.1.5 Signals
Call buttons shall have visible signals to indicate when each call is registered and when each call is answered. EXCEPTIONS: 1....
-
Ampetronic CLS1 Wall Mount Perimeter Induction Loop Driver Hearing System
The Ampetronic CLS1is the first in a series of induction loop drivers aimed at the demands of the electrical and audio-visual contractor....
-
407.2.1.5 Signals
Call buttons shall have visible signals to indicate when each call is registered and when each call is answered. EXCEPTIONS: 1....
-
11B-407.2.2.1 Visible and audible signals
A visible and audible signal shall be provided at each hoistway entrance to indicate which car is answering a call and the car’s direction of travel....
-
11B-407.2.1.5 Signals
Call buttons shall have visible signals to indicate when each call is registered and when each call is answered. Exceptions: Reserved. Reserved. [2010 ADA Standards] 2....
-
11B-411.2.1.2.3 Accessibility function button
The accessibility function button shall be identified by the International Symbol of Accessibility and a raised indication....
-
1. PATH OF TRAVEL DOCUMENTATION
Indication on the facility site plan of the project’s area of work....
