A telephone and emergency signal device shall be provided in the car.
Search Results "Private Rail System"
-
409.4.7.1 Type
-
409.2 Call Buttons
409.2 Call Buttons. Call buttons shall be ¾ inch (19 mm) minimum in the smallest dimension and shall comply with 309.
-
409.4.7.2 Operable Parts
The telephone and emergency signaling device shall comply with 309.3 and 309.4.
-
409.4.7.3 Compartment
409.4.7.3 Compartment. If the telephone or device is in a closed compartment, the compartment door hardware shall comply with 309.
-
409.4.7.1 Type
409.4.7.1 Type. A telephone and emergency signal device shall be provided in the car.
-
409.4.7.3 Compartment
If the telephone or device is in a closed compartment, the compartment door hardware shall comply with 309.
-
409.2 Call Buttons
Call buttons shall be 3/4 inch (19 mm) minimum in the smallest dimension and shall comply with 309.
-
409.4.7.4 Cord
The telephone cord shall be 29 inches (735 mm) long minimum.
-
409.4.7.4 Cord
409.4.7.4 Cord. The telephone cord shall be 29 inches (735 mm) long minimum.
-
409.4.3 Platform to Hoistway Clearance
409.4.3 Platform to Hoistway Clearance. The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum.
-
Assistive Listening Systems
There are three main types of assistive listening systems commonly used in public spaces: Induction-loop systems: A hearing loop system includes a sound source, such as a microphone which...
-
907.2.2 Group B
A manual fire alarm system shall be installed in Group B occupancies having an occupant load of 500 or more persons or more than 100 persons above or below the lowest level of exit discharge...
-
Private Businesses that Serve the Public: Public Accommodations
Private Businesses that Serve the Public: Public Accommodations Private businesses that provide goods or services to the public are called public accommodations in the ADA....
-
409.1 General
Private residence elevators that are provided within a residential dwelling unit required to provide mobility features complying with 809.2 through 809.4 shall comply with 409 and with ASME...
-
11B-810.6.3 Station names
Stations covered by this section shall have identification signs complying with Section 11B-703.5 _|Signs; Visual Characters|_. Signs shall be clearly visible and within the sight...
-
810.6.3 Station Names
Stations covered by this section shall have identification signs complying with 703.5. Signs shall be clearly visible and within the sight lines of standing and sitting passengers...
-
810.5.2 Detectable Warnings
Platform boarding edges not protected by platform screens or guards shall have detectable warnings complying with 705 along the full length of the public use area of the platform.
-
T303 Handrails, Stanchions, and Handholds
[See subsections ...]
-
T210 Wheelchair Spaces
[See subsections ...]
-
T214 Operable Parts
[See subsections ...]
-
T207 Handrails, Stanchions, and Handholds
[See subsections ...]
-
14. In § 38.93(d)(3)
§ 38.93 [Amended] 14. In § 38.93(d)(3), remove the period at the end of the paragraph and add the following words: “,ensuring compliance with section 37.42, where applicable.” in...
-
§ 38.97(b)
(b) Where provided, handrails or stanchions shall be sufficient to permit safe boarding, on-board circulation, seating and standing assistance, and alighting by persons with...
-
§ 38.115 Interior circulation, handrails and stanchions
[See subsections ...]