(a) New, used and remanufactured intercity rail cars, to be considered accessible by regulations in part 37 of this title shall comply with this subpart to the extent required for each type...
Search Results "Elevator Car Control"
Filters
Commonly Searched Documents
-
§ 38.111(a)
-
Automatic Operation [4.10.2]
The elevator must be automatically operable by the passenger....
-
11B-408.1 General
Limited-use/limited-application elevators shall comply with Section 11B-408 and with ASME A17.1. They shall be passenger elevators as classified by ASME A17.1....
-
§ 38.125(b)(4) Power or equipment failure
(4) Power or equipment failure. Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding...
-
§ 38.125(b)(10) Platform movement
(10) Platform movement. No part of the platform shall move at a rate exceeding 6 inches/second during lowering and lifting an occupant, and shall not exceed 12 inches/second during...
-
§ 38.125(b)(11) Boarding direction
(11) Boarding direction. The lift shall permit both inboard and outboard facing of wheelchairs and mobility aids.
-
11B-604.9.5 Flush controls
Flush controls shall be hand operated or automatic....
-
11B-604.9.5 Flush controls
Flush controls shall be hand operated or automatic....
-
§ 38.111(c)
(c) If portions of the car are modified in a way that it affects or could affect accessibility, each such portion shall comply, to the extent practicable, with the applicable provisions...
-
4.31.5(2)
(2) Volume controls, capable of a minimum of 12 dbA and a maximum of 18 dbA above normal, shall be provided in accordance with 4.1.3....
-
4.21.5 Controls
Faucets and other controls complying with 4.27.4 shall be located as shown in Fig. 37....
-
4.21.5 CONTROLS
Faucets and other controls complying with 4.27.4 shall be located as shown in Fig. 37....
-
607.4.2.2 Control End Wall
607.4.2.2 Control End Wall. A grab bar 24 inches (610 mm) long minimum shall be installed on the control end wall at the front edge of the bathtub....
-
407.2.1.2 Size
EXCEPTION: Existing elevator call buttons shall not be required to comply with 407.2.1.2....
-
1133A.6 Kitchen sink faucet controls
1133A.6 Kitchen sink faucet controls. ...
-
11B-407.4.10.3 Structural strength
ETA Editor's Note There is no requirement for support rails inside elevator cars in 2010 ADAS....
-
11B-407.4.10.3 Structural strength
ETA Editor's Note There is no requirement for support rails inside elevator cars in 2010 ADAS....
-
407.2.1.2 Size
EXCEPTION: Existing elevator call buttons shall not be required to comply with 407.2.1.2....
-
407.2.1.2 Size
EXCEPTION: Existing elevator call buttons shall not be required to comply with 407.2.1.2....
-
607.4.1.2 Control End Wall
607.4.1.2 Control End Wall. A grab bar 24 inches (610 mm) long minimum shall be installed on the control end wall at the front edge of the bathtub....
-
1008.2.5.2 Elevated
The rise for any ramp run connecting elevated play components shall be 12 inches (305 mm) maximum....
-
1008.2.5.2 Elevated
The rise for any ramp run connecting elevated play components shall be 12 inches (305 mm) maximum....
-
Centers for Disease Control and Prevention (CDC)
The CDC is one of the major operating components of the Department of Health and Human Services. CDC works 24/7 to protect America from health, safety and security threats, both...
-
Additional clarification requested
Please add 2010 ADA cite reference
