VERTICAL ACCESS Elevators: Controls; visual and audio signals 11B-407.2 Elevators: Symbols 11B-407.4.7.1...
Search Results "Elevator Car Control"
Filters
Commonly Searched Documents
-
Vertical Access
-
Vertical Access
VERTICAL ACCESS Elevators: Controls; visual and audio signals 11B-407.2 Elevators: Symbols 11B-407.4.7.1...
-
Automatic Operation [4.10.2]
The elevator must be automatically operable by the passenger....
-
§ 38.111(a)
(a) New, used and remanufactured intercity rail cars, to be considered accessible by regulations in part 37 of this title shall comply with this subpart to the extent required for each type...
-
11B-408.1 General
Limited-use/limited-application elevators shall comply with Section 11B-408 and with ASME A17.1. They shall be passenger elevators as classified by ASME A17.1....
-
§ 38.125(b)(4) Power or equipment failure
(4) Power or equipment failure. Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding...
-
§ 38.125(b)(10) Platform movement
(10) Platform movement. No part of the platform shall move at a rate exceeding 6 inches/second during lowering and lifting an occupant, and shall not exceed 12 inches/second during...
-
§ 38.125(b)(11) Boarding direction
(11) Boarding direction. The lift shall permit both inboard and outboard facing of wheelchairs and mobility aids.
-
11B-604.9.5 Flush controls
Flush controls shall be hand operated or automatic....
-
11B-604.9.5 Flush controls
Flush controls shall be hand operated or automatic....
-
§ 38.111(c)
(c) If portions of the car are modified in a way that it affects or could affect accessibility, each such portion shall comply, to the extent practicable, with the applicable provisions...
-
4.31.5(2)
(2) Volume controls, capable of a minimum of 12 dbA and a maximum of 18 dbA above normal, shall be provided in accordance with 4.1.3....
-
4.21.5 Controls
Faucets and other controls complying with 4.27.4 shall be located as shown in Fig. 37....
-
4.21.5 CONTROLS
Faucets and other controls complying with 4.27.4 shall be located as shown in Fig. 37....
-
607.4.2.2 Control End Wall
607.4.2.2 Control End Wall. A grab bar 24 inches (610 mm) long minimum shall be installed on the control end wall at the front edge of the bathtub....
-
407.2.1.2 Size
EXCEPTION: Existing elevator call buttons shall not be required to comply with 407.2.1.2....
-
1133A.6 Kitchen sink faucet controls
1133A.6 Kitchen sink faucet controls. ...
-
407.2.1.2 Size
EXCEPTION: Existing elevator call buttons shall not be required to comply with 407.2.1.2....
-
407.2.1.2 Size
EXCEPTION: Existing elevator call buttons shall not be required to comply with 407.2.1.2....
-
11B-407.4.10.3 Structural strength
ETA Editor's Note There is no requirement for support rails inside elevator cars in 2010 ADAS....
-
11B-407.4.10.3 Structural strength
ETA Editor's Note There is no requirement for support rails inside elevator cars in 2010 ADAS....
-
607.4.1.2 Control End Wall
607.4.1.2 Control End Wall. A grab bar 24 inches (610 mm) long minimum shall be installed on the control end wall at the front edge of the bathtub....
-
1008.2.5.2 Elevated
The rise for any ramp run connecting elevated play components shall be 12 inches (305 mm) maximum....
-
1008.2.5.2 Elevated
The rise for any ramp run connecting elevated play components shall be 12 inches (305 mm) maximum....