These budget-friendly shorts are practical for daily use, offering basic functionality for construction, maintenance, and outdoor jobs....
Search Results "Closed Functionality"
-
cheap work shorts
-
Tom Sachs, AIA, Oudens Knoop Knoop + Sachs, Architects
Design Excellence must include function...
-
4.19.5 FAUCETS
Self-closing valves are allowed if the faucet remains open for at least 10 seconds....
-
404.2.9 Door and Gate Opening Force
These forces do not apply to the force required to retract latch bolts or disengage other devices that hold the door or gate in a closed position....
-
4.3.11.1(6)
Doors in the smoke barrier shall be tight-fitting smoke- and draft-control assemblies having a fire-protection rating of not less than 20 minutes and shall be self-closing or automatic closing...
-
404.2.9 Door and Gate Opening Force
These forces do not apply to the force required to retract latch bolts or disengage other devices that hold the door or gate in a closed position....
-
§ 35.151(b)(4)(v)(B)(1)
(1) If an area containing a primary function has been altered without providing an accessible path of travel to that area, and subsequent alterations of that area, or a different area on...
-
20. How does the Program ensure that implementation of the agreement will occur?
To ensure that relief is actually obtained, no matter is deemed successfully resolved and closed until both parties verify the full implementation of the terms of the agreement....
-
Protruding Objects
Protruding Objects Baby changing tables cannot violate the protruding object requirements of TAS 204 and 307 in either an open or closed position since either position is a potential...
-
1132A.3, Item 2
Swinging doors shall provide a net clear opening width of not less than 32 inches (813 mm), measured with the door or doors positioned at an angle of 90 degrees from the closed position....
-
4.19.5 Faucets
If self-closing valves are used the faucet shall remain open for at least 10 seconds....
-
Elevator Car Requirements [§407.4]
Alternative configurations that provide unobstructed wheelchair turning space (60” diameter circle or T-turn) with the doors closed are permitted....
-
1132A.3, Item 2
Swinging doors shall provide a net clear opening width of not less than 32 inches (813 mm), measured with the door or doors positioned at an angle of 90 degrees from the closed position....
-
§ 38.107(b)
(b) Restrooms required to be accessible shall be in close proximity to at least one seating location for persons using mobility aids and shall be connected to such a space by an unobstructed...
-
809.5.6 Site, Building, or Floor Entrance
Where a system, including a closed-circuit system, permitting voice communication between a visitor and the occupant of the residential dwelling unit is provided, the system shall comply...
-
D. Paperwork Reduction Act
This rule includes a requirement that movie theaters provide information to the public about which movies are available with closed movie captioning and audio description when publishing...
-
1630.2(n)(3)(I)
(I) The employers judgment as to which functions are essential;...
-
1630.2(n)(3)(IV)
(IV) The consequences of not requiring the incumbent to perform the function;...
-
Alteration
A change in the original purpose, intent, or function of a trail. ...
-
§1630.2(n)(3)(i)
(i) The employer's judgment as to which functions are essential;...
-
§1630.2(n)(3)(iv)
(iv) The consequences of not requiring the incumbent to perform the function;...
-
Accessible Check-out Aisle Signage
They recommended that the guidelines should be revised to ensure access to each type of aisle serving a different function, such as express aisles or cash-only aisles. Response....
-
Efforts to maximize benefits
Resource Guide for Accessible Design of Consumer Electronics", 1996, notes "Today, one factor contributing to market share is the increasing number of potential customers who experience functional...
-
f. Work experience of people who have performed a job in the past and work experience of people who currently perform similar jobs
The employer should consult such employees and observe their work operations to identify essential job functions, since the tasks actually performed provide significant evidence of these...