(2) Multi-bedroom housing units containing accessible sleeping rooms with mobility features shall have an accessible route throughout the unit in accordance with section 809.2 of the 2010...
Search Results "Patient Room"
Commonly Searched Documents
-
§ 36.406(e)(2)
- Harris Communications Inc. ADA Compliant Guest Room Kit 500A Hard Case
-
11B-224.7.1 Multi-bedroom housing units with mobility features
Multi-bedroom housing units containing accessible sleeping rooms with mobility features shall have an accessible route throughout the unit in compliance with Section 11B-809.2....
-
Base Support [No specific provision—affects M303.2.4]
6.7 9.5 35.7 Power (n=67) 1.3 2.2 2.6 4.3 8.3 10 16.4 A maximum base support height of 1.5 inches will provide room...
-
Feature 3 - Building Entrance
Feature 3 - Building Entrance Signs for an alternate accessible entrance are posted at inaccessible entrances and key decision points along the accessible route. An...
-
Temporary Barrier Removal Suggestions for Accessible Features
Temporary Barrier Removal Suggestions for Accessible Features
-
11B-219 Assistive listening systems.
[See subsections ...]
-
11B-219.1 General
Assistive listening systems shall be provided in accordance with Section 11B-219 and shall comply with Section 11B-706.
-
11B-219 Assistive listening systems
[See subsections ...]
-
11B-219.1 General
Assistive listening systems shall be provided in accordance with Section 11B-219 and shall comply with Section 11B-706.
-
9.4 Other Sleeping Rooms and Suites
Doors and doorways designed to allow passage into and within all sleeping units or other covered units shall comply with 4.13.5.
-
General description of monetized benefits for water closet clearance in single-user toilet rooms—in-swinging doors (Req. # 32)
The expert benefits panel estimated that single-user toilet rooms with in-swinging doors are used less frequently on average—about once every 20 visits to a facility with such a toilet room...
-
General description of monetized benefits for water closet clearance in single-user toilet rooms—in-swinging doors (Req. # 32)
The expert benefits panel estimated that single-user toilet rooms with in-swinging doors are used less frequently on average—about once every 20 visits to a facility with such a toilet room...
-
Bench: ADA Standard Section 612.2
Section 612.2 covers the current ADA Standards for benches in saunas and steam rooms.
-
M303.2.4 Equipment Clearances (Section-by-Section Analysis)
The MDE NPRM proposed knee and toe clearance for diagnostic equipment used by patients seated in wheelchairs to allow for components in the wheelchair space which the patient could approach...
-
M302.2.1 Height
The height of the transfer surface during patient transfer shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured from the floor to the top of the transfer surface....
-
Can I tell a patient that I cannot treat her because I don’t have accessible medical equipment?
Q Can I tell a patient that I cannot treat her because I don’t have accessible medical equipment? Generally no....
-
11B-612.2 Bench
Where seating is provided in saunas and steam rooms, at least one bench shall comply with Section 11B-903....
-
M303.2.3.1 Front or Rear Entry
Where wheelchair space entry and exit is provided at only one end (front or rear) the wheelchair space shall be 48 inches (1220 mm) deep minimum.
-
M305.3 Standing Supports
Standing supports shall provide continuous support throughout use of the diagnostic equipment and shall comply with M305.3.
-
M303.2.3.3 Side Entry
Where wheelchair space entry is only from the side, the wheelchair space shall be 60 inches (1525 mm) deep minimum.
-
M303.2.3.2 Pass Through Entry
Where wheelchair space entry and exit permits pass through from one end to the other, the wheelchair space shall be 40 inches deep (1015 mm) minimum.
-
M304.2.2 Standing Supports
Standing supports shall be provided on two sides of the standing surface and shall comply with M305.3. EXCEPTION: Diagnostic equipment with entry and exit permitting pass-through...
-
M305.3 Standing Supports (Section-by-Section Analysis)
M305.3 provides the technical requirements for standing supports which are required on diagnostic equipment covered by M304. This provision has been reorganized in the final rule...