Section 208.3.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for parking space locations.
Search Results "Edge Protection"
-
General: ADA Standard Section 208.3.1
-
Track Crossing
The proposed rule required route surfaces to be level with the rail top, but permitted a 2 ½ inch gap at the inner edge of rails to accommodate wheel flanges (1003.2.7)....
-
1009.2.3 Clear Deck Space
The space shall be 36 inches (915 mm) wide minimum and shall extend forward 48 inches (1220 mm) minimum from a line located 12 inches (305 mm) behind the rear edge of the seat....
-
4.15.3 Spout Location
On an accessible drinking fountain with a round or oval bowl, the spout must be positioned so the flow of water is within 3 in (75 mm) of the front edge of the fountain....
-
903.4 Back Support
Back support shall be 2 1/2 inches (64 mm) maximum from the rear edge of the seat measured horizontally. ...
-
810.2.2 Dimensions--Modification to 810.2.2 of Appendix D to 36 CFR Part 1191
810.2.2 of Appendix D to 36 CFR Part 1191 Bus boarding and alighting areas shall provide a clear length of 96 inches (2440 mm), measured perpendicular to the curb or vehicle roadway edge...
-
11B-307.4 Vertical clearance
The leading edge of such guardrail or barrier shall be located 27 inches (686 mm) maximum above the finish floor or ground....
-
307.4 Vertical Clearance
The leading edge of such guardrail or barrier shall be located 27 inches (685 mm) maximum above the finish floor or ground....
-
602.2 Clear Floor Space
with 305 shall be permitted at units for children's use where the spout is 30 inches (760 mm) maximum above the finish floor or ground and is 3 1/2 inches (90 mm) maximum from the front edge...
-
Reeve-Irvine Research Center
Based at the University of California, Irvine, RIRC labs are equipped and staffed to allow cutting edge research at multiple levels ranging from stem cells to robotic retraining to promote...
-
Used DJI Mavic 2 Buying Guide: How to Find a Great Deal Safely?
A careful approach not only protects your investment but also ensures you get a high-performance drone at a much better price than buying new....
-
1015.2 Where required
aisles, stairs, ramps and landings that are located more than 30 inches (762 mm) measured vertically to the floor or grade below at any point within 36 inches (914 mm) horizontally to the edge...
-
HEWI Mirror 950.01.300
A continuous mirror, which extends to the edge of the washbasin, is not only suitable for seated users but also for those standing....
-
Surviving the Night Shift: A Guide to Enjoying Store Management with a Horrific Twist
You're essentially managing a limited resource (power) to "protect your assets" (yourself) and reach the end of your shift, just like managing inventory or budget in a traditional management...
-
12113(d)(3) Construction
.-- Nothing in this Act shall be construed to preempt, modify, or amend any State, county, or local law, ordinance, or regulation applicable to food handling which is designed to protect...
-
12209(a)(3) Exercise of rulemaking power
--Notwithstanding any other provision of law, enforcement and adjudication of the rights and protections referred to in paragraph (2)(A) shall be within the exclusive jurisdiction of the...
-
Exclusions
Check your state law, many have anti-discrimination laws similar to the ADA and they may protect people with some of of these conditions....
-
12113(e)(3) Construction
Construction Nothing in this chapter shall be construed to preempt, modify, or amend any State, county, or local law, ordinance, or regulation applicable to food handling which is designed to protect...
-
232.3 Special Holding Cells and Special Housing Cells
Cells subject to this requirement include, but are not limited to, those used for purposes of orientation, protective custody, administrative or disciplinary detention or segregation, detoxification...
-
9 [§ 4.7.5]
9 [§ 4.7.5] Curb ramps either have flared sides or vertical edges called returned curbs....
-
11B-1009.2.3 Clear deck space
The space shall be 36 inches (914 mm) wide minimum and shall extend forward 48 inches (1219 mm) minimum from a line located 12 inches (305 mm) behind the rear edge of the seat....
-
307.4 Vertical Clearance
The leading edge of such guardrail or barrier shall be located 27 inches (685 mm) maximum above the finish floor or ground....
-
Gripping Surface Cross Section and Clearances M301, M302, and M305.2
Gripping Surface Cross Section and Clearances M301, M302, and M305.2 Gripping surface for transfer supports shall be free of sharp or abrasive elements and shall have rounded edges per...
-
R305.2.5 Pedestrian At-Grade Rail Crossings
The edge of the detectable warning surface nearest the rail crossing shall be 1.8 m (6.0 ft) minimum and 4.6 m (15.0 ft) maximum from the centerline of the nearest rail....
