1002.4.4.3 Permitted Protrusions in Wheelchair Spaces....
Search Results "Turning Space"
Filters
Commonly Searched Documents
-
1002.4.4.3 Permitted Protrusions in Wheelchair Spaces
-
4.7.9.2 Clear Floor or Ground Space
Clear floor or ground space 48 inches (1220 mm) by 30 inches (760 mm) oriented for a forward or parallel approach shall be provided for utility sinks required to meet 4.7.9....
-
T210.1 General
Non-rail vehicles shall provide wheelchair spaces in accordance with T210....
-
11B-226.1 General
Where dining surfaces are provided for the consumption of food or drink, at least 5 percent of the seating spaces and standing spaces at the dining surfaces shall comply with Section 11B...
-
4.1.1 General
In alterations, where a condition for exception in section 1.1 prohibits full compliance with a specific requirement for clear floor or ground space surface slope, size, or location, the...
-
T210.2 Large non-rail vehicles
Large non-rail vehicles shall provide at least two wheelchair spaces complying with T602....
-
T210.3 Small non-rail vehicles
Small non-rail vehicles shall provide at least one wheelchair space complying with T602....
-
206.7.2 Wheelchair Spaces
Platform lifts shall be permitted to provide an accessible route to comply with the wheelchair space dispersion and line-of-sight requirements of 221 and 802....
-
F206.7.2 Wheelchair Spaces
Platform lifts shall be permitted to provide an accessible route to comply with the wheelchair space dispersion and line-of-sight requirements of F221 and 802....
-
1002.4.4.3 Permitted Protrusions in Wheelchair Spaces
above the floor or ground surface of the wheelchair space....
-
4.1.3(7)(b)
(b) Within a building or facility, at least one door at each accessible space shall comply with 4.13....
-
Parking Spaces [4.6.3]
"Universal" parking spaces can be provided instead of separate standard and van spaces; (designated van spaces are not required under this design)....
-
11B-703.2.8 Line spacing
Spacing between the baselines of separate lines of raised characters within a message shall be 135 percent minimum and 170 percent maximum of the raised character height....
-
Width of Spaces [1012.2]
Parking spaces and pull-up spaces for RVs must be at least 20 feet wide to accommodate RVs equipped with a lift (figure 27)....
-
11B-234.3 Minimum number
Amusement rides shall provide at least one wheelchair space complying with Section 11B-1002.4, or at least one amusement ride seat designed for transfer complying with Section 11B-1002.5...
-
T602 Wheelchair Spaces
An exception has been added to T602.4 in the final rule that permits the space occupied by wheelchair footrests to be located under an adjacent seat, provided that the space under such seat...
-
305.3 Trash Can Clear Floor Space
-
604.3.1 Water Closet Clear Floor Space
-
1002.4.4.3 Permitted Protrusions in Wheelchair Spaces
Objects are permitted to protrude a distance of 6 inches (150 mm) maximum along the front of the wheelchair space, where located 9 inches (230 mm) minimum and 27 inches (685 mm) maximum...
-
1002.6.3 Wheelchair Storage Space
Wheelchair storage spaces complying with 305 shall be provided in or adjacent to unload areas for each required transfer device and shall not overlap any required means of egress or accessible...
-
1002.6.3 Wheelchair Storage Space
Wheelchair storage spaces complying with 305 shall be provided in or adjacent to unload areas for each required transfer device and shall not overlap any required means of egress or accessible...
-
III-7.3130 General exceptions
Accessibility is not required to -- 1) Observation galleries used primarily for security purposes; or 2) Nonoccupiable spaces accessed only by ladders, crawl spaces, very narrow passageways...
-
Sec. 469.001(a)
of this chapter is to ensure that each building and facility subject to this chapter is accessible to and functional for persons with disabilities without causing the loss of function, space...
-
703.5.9 Line Spacing
Spacing between the baselines of separate lines of characters within a message shall be 135 percent minimum and 170 percent maximum of the character height....
