and 27 inches (686 mm) maximum from the seat wall or shall be located on the back wall opposite the seat 15 inches (381 mm) maximum, left or right of the centerline of the seat....
Search Results "Mobility Aid Seating Location"
-
11B-608.5.3 Alternate roll-in type shower compartments
-
11B-608.5.3 Alternate roll-in type shower compartments
and 27 inches (686 mm) maximum from the seat wall or shall be located on the back wall opposite the seat 15 inches (381 mm) maximum, left or right of the centerline of the seat....
-
802.2.1 Lines of Sight Over Seated Spectators
Where spectators are expected to remain seated during events, spectators in wheelchair spaces shall be afforded lines of sight complying with 802.2.1....
-
Sec.36.304(b)(15)
(15) Installing a raised toilet seat;...
-
§ 36.304(b)(15)
(15) Installing a raised toilet seat;...
-
Section 36.308 Seating in Assembly Areas (Preamble, Section-by-Section Analysis)
This section does not address the provision of auxiliary aids or the removal of communications barriers that are structural in nature....
-
11B-1002.4.7.1 Shoulder-to-shoulder seating
Where an amusement ride provides shoulder-to-shoulder seating, companion seats shall be shoulder-to-shoulder with the adjacent wheelchair space....
-
4.30.6 Mounting Location and Height
4.30.6 Mounting Location and Height. Where permanent identification is provided for rooms and spaces, signs shall be installed on the wall adjacent to the latch side of the door....
-
A4.1.3(19)(a)
Folding seating units are usually two fixed seats that can be easily folded into a fixed center bar to allow for one or two open spaces for wheelchair users when necessary....
-
Sec.36.303(f) Alternatives
If provision of a particular auxiliary aid or service by a public accommodation would result in a fundamental alteration in the nature of the goods, services, facilities, privileges, advantages...
-
802.2.1 Lines of Sight over Seated Spectators
Where spectators are expected to remain seated during events, spectators in wheelchair spaces shall be afforded lines of sight complying with 802.2.1. [ECTCR UFAS 4.33.3]...
-
Seat Height
Seat Height The lift must be designed so that the seat will make a stop between a minimum of 16 inches and maximum of 19 inches (measured from the deck to the top of the seat surface,...
-
Somfy Window Covering Controls and Intergration with myLink™ App
The myLink puts you in control, so that you can operate your motorized shades, blinds, awnings, screens and shutters with your favorite mobile device whether you’re home or not....
-
What employment practices are covered by the ADA?
HIV or AIDS....
-
3.3.6 Knee Clearance Height, minimum
Smaller individuals who have large thighs, those with high seats and scooter users also have high lap heights....
-
4.32.1 Minimum Number
Fixed or built-in seating or tables required to be accessible by 4.1 shall comply with 4.32....
-
§35.130(f) (Section-by-Section Analysis)
Such measures may include the provision of auxiliary aids or of modifications required to provide program accessibility....
-
M303 Diagnostic Equipment Used by Patients Seated in Wheelchair
M303 provides technical criteria for diagnostic equipment used by patients seated in a wheelchair....
-
Fraudulent purchase of designated accessible seating. (Section-by-Section Analysis)
Moreover, the Department recognizes that the implementation of some of its proposals, such as those relating to the public identification of accessible seating, increase the potential for...
-
206.4.4.1 Location
206.4.4.1 Location....
-
232.2.1 Cells with Mobility Features
232.2.1 Cells with Mobility Features. At least 2 percent, but no fewer than one, of the total number of cells in a facility shall provide mobility features complying with 807.2....
-
4.30.6 MOUNTING LOCATION AND HEIGHT
Interior signage shall be located alongside the door on the latch side and shall be mounted at a height of between 54 in and 66 in (1370 mm and 1675 mm) above the finished floor....
-
4.32.1 MINIMUM NUMBER
Fixed or built-in seating, tables, or work surfaces required to be accessible by 4.1 shall comply with 4.32....
-
Height Above Finish Floor or Ground: ADA Standard Section 703.4.1
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
