The International Symbol of Accessibility shall comply with Figure 703.7.2.1. Figure 703.7.2.1 International Symbol of Accessibility
Search Results "Informational Signage"
Filters
Commonly Searched Documents
-
703.7.2.1 International Symbol of Accessibility
-
703.4.2 Location
Where a tactile sign is provided at a door, the sign shall be located alongside the door at the latch side. Where a tactile sign is provided at double doors with one active leaf, the...
-
T215.3.2 Stop Request Systems
Where non-rail vehicles stop on passenger request, stop request systems complying with T704.3 shall be provided.
-
Stairs, short-term list
I’ll put one up there, short-term, stairs. Stairs is a tangible safety issue and in fact the code has elements of some of the things that we’ve just described as better practices...
-
11B-502.8.1 Size
The additional sign shall not be less than 17 inches (432 mm) wide by 22 inches (559 mm) high.
-
1011.4, Item 2.3
2.3 “EXIT STAIR UP”
-
1011.4, Item 2.4
2.4 “EXIT RAMP UP”
-
1011.4, Item 5
5. Each exit door through a horizontal exit that is required to comply with Section 1011.1 shall be identified by a sign with the words, “TO EXIT.”
-
Problem Four
Problem Four: No sign with the international symbol of accessibility is installed at each accessible parking space. Suggestion: Provide a temporary sign in front of each...
-
4.30.7(1)
(1) Facilities and elements required to be identified as accessible by 4.1 shall use the international symbol of accessibility. The symbol shall be displayed as shown in Fig. 43(a)...
-
703.7.2.1 International Symbol of Accessibility
The International Symbol of Accessibility shall comply with Figure 703.7.2.1.
-
5d.
5d. Are raised letters and Braille characters used to identify each floor button and each control? [ADA Stds 4.10.12] Yes _____ No _____
-
4.1.2(7)(a)
(a) Parking spaces designated as reserved for individuals with disabilities;
-
1013.4, Item 4
4. Each exit access door from an interior room or area to a corridor or hallway that is required to comply with Section 1013.1, shall be identified by a tactile exit sign with the...
-
1013.4, Item 2.1
2.1. “EXIT STAIR DOWN”
-
1013.4, Item 2.2
2.2. “EXIT RAMP DOWN”
-
1013.4, Item 2.4
2.4. “EXIT RAMP UP”
-
1013.4, Item 2.3
2.3. “EXIT STAIR UP”
-
1013.4, Item 5
5. Each exit door through a horizontal exit that is required to comply with Section 1013.1 shall be identified by a sign with the words, “TO EXIT.” Raised character and Braille...
-
11B-502.8 Additional signs
An additional sign shall be posted either; 1) in a conspicuous place at each entrance to an off-street parking facility or 2) immediately adjacent to on-site accessible parking and...
-
11B-502.8.1 Size
The additional sign shall not be less than 17 inches (432 mm) wide by 22 inches (559 mm) high.
-
11B-812.8.7 Location
Required identification signs shall be visible from the EVCS it serves. Signs shall be permanently posted either immediately adjacent to the vehicle space or within the projected...
-
11B-812.8.4 Ambulatory
Ambulatory EVCS shall not be required to be identified by an ISA.
-
11B-812.8.6 Finish and size
Identification signs shall be reflectorized with a minimum area of 70 square inches (45,161 mm2).