When glass is used, it shall have minimum thickness of not less than 1/8 inch (3.17 mm) when fully tempered, or ¼ inch (6.35 mm) when laminated, and shall pass the test requirements of this...
Search Results "Head Drop Test"
Filters
Commonly Searched Documents
-
1134A.6, Item 7
-
Which surfaces are accessible to everyone?
They completed standard tests of fitness to ensure that a variety of ability levels was represented....
-
The Project
The North Carolina Aquarium at Pine Knoll Shores, one of the three aquariums in North Carolina, agreed to be the test site for the final talking tactile fish installation. ...
-
Unified Facilities Guide Specifications
Specifications In Section 02752, Portland Cement Concrete Pavement for Roads and Site Facilities, published by the National Institute of Building Sciences, it is stated that surfaces should be tested...
-
1193.23(b)(4) (Advisory Guidance)
Manufacturers must consider how they can make reasonable efforts to validate any unproven access solutions through testing with individuals with disabilities or with appropriate disability-related...
-
1134A.5, Item 5
When glass is used, it shall have minimum thickness of not less than 1/8 inch (3.17 mm) when fully tempered, or 1/4 inch (6.35 mm) when laminated, and shall pass the test requirements of...
-
1134A.6, Item 7
When glass is used, it shall have minimum thickness of not less than 1/8 inch (3.17 mm) when fully tempered, or ¼ inch (6.35 mm) when laminated, and shall pass the test requirements of this...
-
IPS Corporation Truebro SOFT GUARD PLUS™
Soft Guard Plus features a base base material that has been tested in accordance with testing standard ASTM E84-07 with a 25 flame spread/450 smoke index and a 1/8" soft PVC vinyl material...
-
American Standard Baby Devoro 1.28 gpf FloWise 10 Inch High Round Front Toilet
Built to stand the test of time and handle years of high use, there is an American Standard commercial toilet that's right for any job....
-
Boat Slips: ADA Standard Section 1003.2.1
Another design solution would be to have two 40 foot (12 m) plus continuous gangways joined together at a float, where the float (as the water level falls) will stop dropping at an elevation...
-
11B-1003.2.1 Boat slips
Another design solution would be to have two 40 foot (12 m) plus continuous gangways joined together at a float, where the float (as the water level falls) will stop dropping at an elevation...
-
Modifications to the Longitudinal Study
By the end of 2006, NCA had initial commitments from a number of state or federal outdoor recreation entities to provide test sites for the trail surface study, however, the down turn in...
-
2.2.2 Structural Anthropometry (i.e. Body and WhMD Dimensions)
Posterior most point (head, arm, WhMD, or accessory) Used to measure Occupied Length....
-
Tactile Surface
The proposed rule included provisions that generally recognized alternative tactile surfaces equally detectable underfoot or other designs or technologies that provide equal or superior drop-off...
-
3.3.6 Knee Clearance Height, minimum
In the case of the U.S. and Canadian standards, however, the level of accommodation drops to 80% in relation to measured knee heights among wheelchair users in their respective countries...
-
3.3.15.2 Side (lateral) reach - unobstructed
Reach abilities began to drop at 600‒700 mm (23.5‒27.5 in.) and fell dramatically for all WhMD user groups at heights of 500‒600 mm (19.5‒23.5 in.)....
-
Information That May Be Requested in Post-Offer Examinations or Inquiries
An employer may give follow-up tests or examinations where an examination indicates that further information is needed....
-
EXHIBIT A
• Beginning no later than March 31, 2015 for mobile applications and September 30, 2015 for www.peapod.com, Peapod regularly conducts automated tests of and annually enlists individuals...
-
2.5.2.1 International Electrotechnical Commission (IEC) Standards
When there is no Part 2 standard, equipment is typically tested only to the general standard (i.e., IEC 60601-1)....
-
Issue 4: Wrong pole! …Wrong message!
However, APS can be wired to a control board in the pedestrian signal head or through the controller, so it may be necessary to move the pedestrian signal head (or to completely rewire each...
-
3. Terminology
measurement, n—a series of elevation values taken at a constant interval along a wheel track. 3.1.1.1.1 Discussion—Elevation measurements may be taken statically, as with rod and level per Test...
-
Conclusion
costs-savings, decision-makers should request much more information from the manufacturer including specific instructions for installation and maintenance along with results of laboratory tests...
-
M302 Diagnostic Equipment Used by patients in Seated Position
Stretchers have a head & back support that keep the patient in a semi-reclined position, however the patients legs are not in a dependent position such as that when sitting in a chair...
-
2. Section-by-Section Analysis of Final Guidelines
Where no discussion of comments is provided under a section heading, no comments were received on this section....
