This means that the overall slope in the long dimension should be measured along the center of the aisle or zone using the ends of the area as elevation measuring points and cross slope...
Search Results "End of Row Compartment"
Filters
Commonly Searched Documents
-
1.1.7 Measurement of parking areas
-
11B-812.8.7 Location
Signs shall be permanently posted either immediately adjacent to the vehicle space or within the projected vehicle space width at the head end of the vehicle space....
-
11B-812.8.7 Location
Signs shall be permanently posted either immediately adjacent to the vehicle space or within the projected vehicle space width at the head end of the vehicle space....
-
§382.67(e)
., that it is easier for the carrier if the wheelchair is stowed in the cargo compartment)....
-
§ 38.23(b)(2)(ii) Exception
., “rotary lift”), the requirements of this paragraph prohibiting the lift from being stowed while occupied shall not apply if the stowed position is within the passenger compartment and...
-
F104.1.1 Construction and Manufacturing Tolerances
All dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum end points....
-
M303.2.3.2 Pass Through Entry
Where wheelchair space entry and exit permits pass through from one end to the other, the wheelchair space shall be 40 inches deep (1015 mm) minimum....
-
§ 1194.25(a)
(a) Self contained products shall be usable by people with disabilities without requiring an end-user to attach assistive technology to the product. ...
-
R309.2.1.1 Alterations
In alterations where the street or sidewalk adjacent to the parking spaces is not altered, an access aisle shall not be required provided the parking spaces are located at the end of the...
-
14. In § 38.93(d)(3)
In § 38.93(d)(3), remove the period at the end of the paragraph and add the following words: “,ensuring compliance with section 37.42, where applicable.” in its place....
-
§100.7(a)(1)(ii)
(ii) Failing to take prompt action to correct and end a discriminatory housing practice by that person's employee or agent, where the person knew or should have known of the discriminatory...
-
UMEA Waste Receptacle
Constructed of painted steel and suitable for both indoors and outdoors, UMEA models can be 1, 2 or 3-compartments wide -- each with selectable top inserts and corresponding front graphics...
-
M305.3.2.2 Vertical Position
The height of the lowest end of the gripping surface on vertical standing supports shall be 34 inches (865 mm) minimum and 37 inches (940 mm) maximum above the standing surface....
-
17. In § 38.113, amend paragraph (d)(3)
In § 38.113, amend paragraph (d)(3) by removing the period at the end of the paragraph and adding the words “ensuring compliance with section 37.42, where applicable” in its place....
-
903.2 Clear Floor or Ground Space
Clear floor or ground space complying with 305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
-
Applying Accessibility Guidelines to Your Site
How did we end up with so many accessibility guidelines and standards? Which guidelines and standards apply to your site?...
-
2. Is this trail primarily surfaced with a material other than asphalt, concrete, or boardwalk?
Yes No If “No” is selected, then skip to “End of Survey” (Qualtrics Option). If “Yes is selected, then skip to Question #3....
-
Bobrick B-30919 ClassicSeries® Surface-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
Mounts flush against side wall in accessible toilet compartment to allow clearance for grab bar above unit has toilet tissue dispenser on left side of unit....
-
Urinals
Such toilet rooms will still be required to provide an accessible toilet compartment. Commenters urged that the exception be eliminated....
-
§ 38.159(b)(2)(ii) Exception
., “rotary lift”), the requirements of this paragraph (b)(2) prohibiting the lift from being stowed while occupied shall not apply if the stowed position is within the passenger compartment...
-
Rockwood Manufacturing Company 11047 Series 47 Straight Single Bar Set 8" Pull CTC
Metal: T4 Back to Back and Concealed; Pull Free End = 6, Push Free End = 6, Common End = 5....
-
§ 37.131(a)(2)(ii)
(ii) At end stations and other stations in outlying areas, the entity may designate circles with radii of up to 11/2 miles as part of its service area, based on local circumstances....
-
11B-216.1 General
Building directories, menus, seat and row designations in assembly areas, occupant names, building addresses, and company names and logos shall not be required to comply with Section 11B...
-
Purchasing Multiple Tickets
People purchasing a ticket for an accessible seat may purchase up to three additional seats for their companions in the same row and these seats must be contiguous with the accessible seat...
