Two common methods for providing access to elevated play components are ramps and transfer systems....
Search Results "Curb Ramp"
2010 ADA Definition
Curb Ramp: A short ramp cutting through a curb or built up to it.
Filters
Commonly Searched Documents
-
Elevated Accessible Routes
-
4.1.7(1)(a) General Rule
application sections 5 through 10 unless it is determined in accordance with the procedures in 4.1.7(2) that compliance with the requirements for accessible routes (exterior and interior), ramps...
-
1.1.5
1.1.5 A maximum design cross slope for accessible exterior pedestrian paving and ramps of 1.5% (1:67 or about 3/16 in. per ft. [15 mm per m]) is recommended....
-
Accessible Routes: ADA Standard Section 1002.2
In load or unload areas and on amusement rides, where compliance with 405.2 is not structurally or operationally feasible, ramp slope shall be permitted to be 1:8 maximum. 2....
-
11B-1002.2 Accessible routes
Exceptions: In load or unload areas and on amusement rides, where compliance with Section 11B-405.2 is not structurally or operationally feasible, ramp slope shall be permitted...
-
DSA Drawing 11B-406.6-10 Cut-Through Median Less Than 96 inches in Length with No Gutters (2016 CBC)
Requires the Premium User plan or above. (Login or upgrade your account!) -
Counter Slope: ADA Standard Section 406.2
Section 406.2 covers the current ADA Standards for counter slope of adjoining gutters and road surfaces immediately adjacent to curb ramps.
-
PromenAid: The solution for Mobility Promo
PromenAid informational video for products to enhance mobility
-
PromenAid Handrail System Review by Jon Eakes Video
Information video with Jon Eakes, a home renovation professional. He points out the various feautes and benefits of the handrail system.
-
PromenAid Handrail System Advertisment Video
Short video advertising the benefits of the handrail system for fall prevention, safety, and mobility assistance within the home environment.
-
PromenAid: Handrail Overview
Overview of PromenAid Handrail
-
5.9.2.2 Standing Supports on Dual Ramped Entry Raised Platforms with Wheelchair Spaces
5.9.2.2 Standing Supports on Dual Ramped Entry Raised Platforms with Wheelchair Spaces....
-
Detecto 6550 Portable Wheelchair Scale
It can be used with wheelchairs, straight-legged chairs or as a stand-on scale, and its sloped ramps offer versatility by allowing entry from either side....
-
Detecto BRW1000 Portable Wheelchair Scale
The heavy-duty (yet light-weight) 75-lb platform with integral two-way-access ramps, non-skid rubber mat, and 1,000-lb capacity makes this scale perfect for patients in manual or power wheelchairs...
-
11B-406.2.2 Sides of curb ramps
Where provided, curb ramp flares shall not be steeper than 1:10....
-
11B-406.2.2 Sides of curb ramps
Where provided, curb ramp flares shall not be steeper than 1:10....
-
5.9.2.1 Standing Supports on Single Ramped Entry Raised Platforms with Wheelchair Spaces
5.9.2.1 Standing Supports on Single Ramped Entry Raised Platforms with Wheelchair Spaces....
-
Re: Husky 24" Line Generator Digital Laser Level
See Bill Hecker, AIA, Kirola vs City and County of San Francisco, Expert for DOJ, testimony with regards to Laser level lengths.
-
5.9.2.2 Standing Supports on Dual Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations
integrated into the platform and stretching the full length of the platform (40-inch minimum) for dual ramped entry raised platforms....
-
III-6.2000 Alterations: Path of travel
Because the most important path of travel element is the entrance and route to the area, the library should spend the money on the ramp, telephones, and drinking fountains....
-
T302.3 Openings
Ramp and bridgeplate surfaces shall be permitted to have one opening 1½ inches (38 mm) maximum in width and 4½ inches (115 mm) maximum in length to allow the operator to grasp the ramp or...
-
4.8.6 Cross Slope and Surfaces
The cross slope of ramp surfaces shall be no greater than 1:50. Ramp surfaces shall comply with 4.5....
-
4.8.6 CROSS SLOPE AND SURFACES
The cross slope of ramp surfaces shall be no greater than 1:50. Ramp surfaces shall comply with 4.5....
-
§ 38.125(c)(6)(i) Requirement
When in use for boarding or alighting, the ramp or bridge plate shall be attached to the vehicle, or otherwise prevented from moving such that it is not subject to displacement when loading...
