216.6 Entrances. Where not all entrances comply with 404, entrances complying with 404 shall be identified by the International Symbol of Accessibility complying with 703.7.2.1....
Search Results "Character Width (VMS)"
-
Re: 216.6 Entrances
-
Minimum Clear Opening
Other commenters stated that, generally, door width should provide a 32-inch clear opening, but that this width can be reduced if sufficient maneuvering space is provided at the door....
-
Directional Signs: ADA Standard Section 216.4.3
Section 216.4.3 covers scoping requirements in the current ADA Standards for directional signs.
-
11B-220.2 Point-of-sale devices
Where point-of-sale devices are provided, all devices at each location shall comply with Sections 11B-707.3, 11B-707.7.2, and 11B-707.9. Where point-of-sale devices are provided at...
-
11B-220.2 Point-of-sale devices
Where point-of-sale devices are provided, all devices at each location shall comply with Sections 11B-707.3, 11B-707.7.2, and 11B-707.9. Where point-of-sale devices are provided at...
-
9.5.2(2)(e)
(e) at least one route connecting elements (a), (b), (c) and (d) which a person with mobility impairments can use including minimum clear width of 36 in (915 mm), passing space complying...
-
Feature 2 - Routes to the Building Entrance
Feature 2 - Routes to the Building Entrance Accessible routes connect accessible onsite features (e.g., bus stop, parking) to the building entrance. There must be at least...
-
604.8.1.1 Size
Wheelchair accessible compartments shall be 60 inches (1525 mm) wide minimum measured perpendicular to the side wall, and 56 inches (1420 mm) deep minimum for wall hung water closets...
-
Combination Wheelchair/Horse Accessible Gates
The greatest challenge was to find a gate that allowed horses and wheelchairs to pass, but restricted all motorized traffic. The "V" gate design (see figure 5) allows wheelchairs and...
-
604.8.1.1 Size
Wheelchair accessible compartments shall be 60 inches (1525 mm) wide minimum measured perpendicular to the side wall, and 56 inches (1420 mm) deep minimum for wall hung water closets...
-
604.8.1.1 Size
604.8.1.1 Size. Wheelchair accessible compartments shall be 60 inches (1525 mm) wide minimum measured perpendicular to the side wall, and 56 inches (1420 mm) deep minimum for wall...
-
4.1.2(5)(a)
(a) If parking spaces are provided for self-parking by employees or visitors, or both, then accessible spaces complying with 4.6 shall be provided in each such parking area in...
-
A4.6.3 Parking Spaces
The increasing use of vans with side-mounted lifts or ramps by persons with disabilities has necessitated some revisions in specifications for parking spaces and adjacent access...
-
A4.6.3 PARKING SPACES
High-top vans, which disabled people or transportation services often use, require higher clearances in parking garages than automobiles. When optional van spaces are provided within...
-
216.3 Directional and Informational Signs
216.3 Directional and Informational Signs. Signs that provide direction to or information about interior spaces and facilities of the site shall comply with 703.5. Advisory...
-
F216.3 Directional and Informational Signs
Signs that provide direction to or information about interior spaces and facilities of the site shall comply with 703.5. Advisory F216.3 Directional and Informational Signs....
-
216.3 Directional and Informational Signs
Signs that provide direction to or information about interior spaces and facilities of the site shall comply with 703.5. Advisory 216.3 Directional and Informational Signs....
-
Figure 604.8.1.2 Wheelchair Accessible Toilet Compartment Doors – Drawing from the U.S. Access Board
-
T503 Passenger Access Routes
In the 2010 NPRM, the Access Board proposed prescribing a specific dimensional standard (34 inches) for the clear width of passenger access routes. See 2010 NPRM, Section T502.2....
-
11B-703.5.6 Height from finish floor or ground
Visual characters shall be 40 inches (1016 mm) minimum above the finish floor or ground....
-
ADA Sign Products Exit Sign (6" x 3")
Exit Sign (6"x3") Part Number 103.01.02 Width = 6" Height = 3" Material = 1/8" thermo formed acrylic...
-
11B-703.5.6 Height from finish floor or ground
Visual characters shall be 40 inches (1016 mm) minimum above the finish floor or ground. Exceptions: 1. ...
-
Section D: Entrances
___________________ Location name:______________________ D Polling Place Entrances Yes No N/A Comments/Remedies D1 Is the clear width...
-
11B-703.5.6 Height from finish floor or ground
Visual characters shall be 40 inches (1016 mm) minimum above the finish floor or ground. Exceptions: 1....
