(a) Study The National Council on Disability shall conduct a study and report on the effect that wilderness designations and wilderness land management practices have on the...
Search Results "Sterile Area"
Filters
Commonly Searched Documents
-
12207(a) Study
-
12162(a)(2)(D) Special rule for bi-level dining cars for individuals who use wheelchairs
(D) Special rule for bi-level dining cars for individuals who use wheelchairs Bi-level dining cars shall not be required to
-
1008.2.5.3 Handrails
1008.2.5.3 Handrails. Where required on ramps serving play components, the handrails shall comply with 505 except as modified by 1008.2.5.3. EXCEPTIONS: 1. Handrails shall not be...
-
4.3.11.1(7)
(7) An elevator lobby when elevator shafts and adjacent lobbies are pressurized as required for smokeproof enclosures by local regulations and when complying with requirements herein...
-
4.1.3 ACCESSIBLE HOUSING
Accessible housing shall comply with the requirements of 4.1 and 4.34 except as noted below:
-
E. ADA Coordination and Training:
Olympia shall designate one or more individuals to coordinate, among other things, efforts to assist persons with disabilities with respect to the accessibility of Joe Louis...
-
4.3.10* EGRESS
Accessible routes serving any accessible space or element shall also serve as a means of egress for emergencies or connect to an accessible place of refuge. Such accessible routes...
-
1015.5 Surface
The surface of clear ground spaces and turning spaces shall be firm and stable.
-
11B-1008.2.6.1 Accessibility
Ground surfaces shall comply with ASTM F 1951. Ground surfaces shall be inspected and maintained regularly and frequently to ensure continued compliance with ASTM F 1951.
-
Identification of available accessible seating. (Section-by-Section Analysis)
Identification of available accessible seating. In the NPRM, the Department proposed § 35.138(c), which, as modified and renumbered as paragraph (b)(3) in the final rule, requires a...
-
11B-1002.5 Amusement ride seats designed for transfer
Amusement ride seats designed for transfer shall comply with Section 11B-1002.5 when positioned for loading and unloading. [2010 ADAS] Advisory 1002.5 Amusement Ride Seats...
-
17. Exposing Vehicle to Hazards
If the passenger requests that a vehicle follow a path to a pick up or drop off point that would expose the vehicle and its occupants to hazards, such as running off the road,...
-
§ 38.29(e)
(e) For vehicles in excess of 22 feet in length with front-door lifts or ramps, vertical stanchions immediately behind the driver shall either terminate at the lower edge of the...
-
11B-247.1.2.5 Blended transitions
11B-247.1.2.5 Blended transitions. Blended transitions shall have detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.5.
-
11B-1002.5 Amusement ride seats designed for transfer
Amusement ride seats designed for transfer shall comply with Section 11B-1002.5 when positioned for loading and unloading. Advisory 11B-1002.5 Amusement ride seats designed...
-
11B-705.1.2.5 Blended transitions
11B-705.1.2.5 Blended transitions. Detectable warnings at blended transitions shall be 36 inches (914 mm) in width.
-
11B-1008.2.6.1 Accessibility
Ground surfaces shall comply with ASTM F 1951. Ground surfaces shall be inspected and maintained regularly and frequently to ensure continued compliance with ASTM F 1951.
-
Section 36.406(f) Assembly Areas (Section-by-Section Analysis)
The sale of any seats in the covered area requires removal of the platform, thereby eliminating some of the required wheelchair seating locations. ...
-
221.2.3.1 Horizontal Dispersion
Horizontal dispersion shall not be required in assembly areas with 300 or fewer seats if the companion seats required by 221.3 and wheelchair spaces are located within the 2nd or 3rd quartile...
-
221.2.3.1 Horizontal Dispersion
Horizontal dispersion shall not be required in assembly areas with 300 or fewer seats if the companion seats required by 221.3 and wheelchair spaces are located within the 2nd or 3rd quartile...
-
11B-219.2 Required systems
An assistive listening system shall be provided in assembly areas, including conference and meeting rooms. [2010 ADAS] 219.2 Required Systems. ...
-
11B-219.2 Required systems
An assistive listening system shall be provided in assembly areas, including conference and meeting rooms. [2010 ADAS] 219.2 Required Systems. ...
-
11B-219.2 Required systems
An assistive listening system shall be provided in assembly areas, including conference and meeting rooms. [2010 ADA Standards] 219.2 Required Systems....
-
F221.2.3.1 Horizontal Dispersion
Horizontal dispersion shall not be required in assembly areas with 300 or fewer seats if the companion seats required by F221.3 and wheelchair spaces are located within the 2nd or 3rd quartile...