(d) Passenger coaches or food service cars shall have the number of spaces complying with §38.125(d)(2) of this part and the number of spaces complying with §38.125(d)(3) of this part, as...
Search Results "Elevator Car Designation"
Filters
Commonly Searched Documents
-
§ 38.111(d)
-
11B-1008.2.4.2 Elevated
The clear width of accessible routes connecting elevated play components shall be 36 inches (914 mm) minimum. Exceptions: 1. ...
-
11B-1008.2.4.2 Elevated
The clear width of accessible routes connecting elevated play components shall be 36 inches (914 mm) minimum. Exceptions: 1....
-
§ 38.111(a)
(a) New, used and remanufactured intercity rail cars, to be considered accessible by regulations in part 37 of this title shall comply with this subpart to the extent required for each type...
-
Automatic Operation [4.10.2]
The elevator must be automatically operable by the passenger....
-
§ 38.111(e)
(e) Existing cars retrofitted to meet the seating requirements of §37.91 of this title shall comply with §38.113(e), §38.123, §38.125(d) of this part and shall have at least one door on...
-
11B-408.1 General
Limited-use/limited-application elevators shall comply with Section 11B-408 and with ASME A17.1. They shall be passenger elevators as classified by ASME A17.1....
-
§ 38.125(b)(2) Controls
(2) Controls—
-
§ 38.125(b)(4) Power or equipment failure
(4) Power or equipment failure. Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding...
-
§ 38.125(b)(10) Platform movement
(10) Platform movement. No part of the platform shall move at a rate exceeding 6 inches/second during lowering and lifting an occupant, and shall not exceed 12 inches/second during...
-
§ 38.125(b)(11) Boarding direction
(11) Boarding direction. The lift shall permit both inboard and outboard facing of wheelchairs and mobility aids.
-
§104.7 Designation of responsible employee and adoption of grievance procedures.
[See subsections ...]
-
Future Research Needs
Research should identify current and future efforts to integrate universal design into exhibit planning....
-
5 Steps to Make New Lodging Facilities Comply with the ADA
5 STEPS TO MAKE NEW LODGING FACILITIES COMPLY WITH THE ADA Owners, franchisors, architects, and building contractors who participate in the design and construction of newly constructed...
-
§ 38.111(c)
(c) If portions of the car are modified in a way that it affects or could affect accessibility, each such portion shall comply, to the extent practicable, with the applicable provisions...
-
Greg Knoop. Daylighting
Design with it....
-
Aisle Seats
Section 802.4 provides technical criteria for designated aisle seats....
-
The FSTAG Implementation Process Flowchart
FSTAG must be applied before initiating new construction or altering any National Forest System trail with a "Designed Use" of "Hiker/Pedestrian."...
-
Design Guidelines for the Hearing and Visually-Impaired
Several commenters stated that the proposed guidelines failed to provide design features for people with hearing and visual impairments....
-
407.2.1.2 Size
EXCEPTION: Existing elevator call buttons shall not be required to comply with 407.2.1.2....
-
General: ADA Standard Section 221.1
Section 221.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for assembly areas.
-
11B-407.4.10.3 Structural strength
ETA Editor's Note There is no requirement for support rails inside elevator cars in 2010 ADAS....
-
11B-407.4.10.3 Structural strength
ETA Editor's Note There is no requirement for support rails inside elevator cars in 2010 ADAS....
-
407.2.1.2 Size
EXCEPTION: Existing elevator call buttons shall not be required to comply with 407.2.1.2....