Inclined stairway chairlifts and inclined and vertical platform lifts are available for short-distance vertical transportation....
Search Results "Travel Distance"
Commonly Searched Documents
-
11B-410.1 General
- Endorphin 355 Series e4 Resistance System
-
1. Thigh Breadth
Thigh breadth for this analysis was computed as the larger of two dimensions, the horizontal distance between the lateral (outer) aspect of the hips, and the horizontal distance between...
-
2.2.2.2 New York State Standards
Measurements should be made at a distance 10 cm from the silhouette. (Note: 10 mm would appear to be a more realistic distance.)...
-
Exemptions for Entire Trail or Beach Access Route
exceeds 40 percent for over 20 feet; A trail obstacle 30 inches high or more runs across the full tread width of the trail; The trail surface is neither firm nor stable for a distance...
- NFB: Free White Cane Program
-
11B-704.2.1.2 Forward approach
Where a forward approach is provided, the distance from the front edge of a counter within the telephone enclosure to the face of the telephone unit shall be 20 inches (510 mm) maximum....
-
1016.5 Obstacles
Where possible, obstacles that cross the full width of outdoor recreation access routes should be separated by a distance of 48 inches (1220 mm) minimum....
-
11B-1002.5 Amusement ride seats designed for transfer
Where greater distances are required for transfers, providing gripping surfaces, seat padding, and avoiding sharp objects in the path of transfer will facilitate the transfer....
-
1002.5 Amusement Ride Seats Designed for Transfer
Where greater distances are required for transfers, providing gripping surfaces, seat padding, and avoiding sharp objects in the path of transfer will facilitate the transfer....
-
407.3.4 Door and Signal Timing
car start to close shall be calculated from the following equation: T = D/(1.5 ft/s) or T = D/(455 mm/s) = 5 seconds minimum where T equals the total time in seconds and D equals the distance...
-
407.3.4 Door and Signal Timing
car start to close shall be calculated from the following equation: T = D/(1.5 ft/s) or T = D/(455 mm/s) = 5 seconds minimum where T equals the total time in seconds and D equals the distance...
-
1002.5 Amusement Ride Seats Designed for Transfer
Where greater distances are required for transfers, providing gripping surfaces, seat padding, and avoiding sharp objects in the path of transfer will facilitate the transfer....
-
Audible Information Systems (slide 14)
There’s a distance delay of about three feet right now, so you’re actually [be] three feet past the sign before it transmits to a Blue Tooth phone or earpiece that tells you what that sign...
-
505.6 Gripping Surface
The distance between horizontal projections and the bottom of the gripping surface shall be permitted to be reduced by 1/8 inch (3.2 mm) for each 1/2 inch (13 mm) of additional handrail...
-
Trailhead Signs
The proposed rule would have required the signs to include information on the total distance of the trail and, where exceptions have been used, the location of the first point where the...
-
1016.5 Obstacles
Where possible, obstacles that cross the full width of outdoor recreation access routes should be separated by a distance of 48 inches (1220 mm) minimum....
-
Why test on straight courses and P-shaped turning courses?
The “P” courses were designed so that the subject was turning for approximately 10% of the total distance....
-
11B-704.2.1.2 Forward approach
Where a forward approach is provided, the distance from the front edge of a counter within the telephone enclosure to the face of the telephone unit shall be 20 inches (510 mm) maximum....
-
11B-1002.5 Amusement ride seats designed for transfer
Where greater distances are required for transfers, providing gripping surfaces, seat padding, and avoiding sharp objects in the path of transfer will facilitate the transfer....
-
11B-407.3.4 Door and signal timing
car start to close shall be calculated from the following equation: T = D/(1.5 ft/s) or T = D/(457 mm/s) = 5 seconds minimum where T equals the total time in seconds and D equals the distance...
-
11B-1002.5 Amusement ride seats designed for transfer
Where greater distances are required for transfers, providing gripping surfaces, seat padding, and avoiding sharp objects in the path of transfer will facilitate the transfer. ◼...
-
Station 3-Turning Radii
Alternatively, a higher turning radius means that the bicyclist can maintain the same lean angle and travel around the curve at a faster speed....
-
R310.3 Access Aisle
Access aisles shall be at the same level as the vehicle pull-up space they serve and shall not overlap the vehicular travel lane....