Search Results "Surface"

• Federal Documents > Preamble to Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment - Preamble
  M305.2.5 Surface Hazards (Section-by-Section Analysis)

  No public comments were submitted on this issue, but the MDE Advisory Committee voiced concern about surface hazards stating, “gripping surface configurations must provide an effective and...

• Federal Documents > Standards > ABA Accessibility Standard for GSA Facilities Pocket Guide
  1017.6 Openings

  Openings in the surface of trails, passing spaces, and resting intervals shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1017.6 Openings. ...

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  1133A.4.1 Exceptions

  Two 15-inch (381 mm) wide minimum breadboards may be provided in lieu of the required 30 inches (762 mm) of countertop work surface, and used without meeting the repositioning requirements...

• Federal Documents > Preamble to Guidelines > 36 CFR Part 1191 ABA Accessibility Guidelines, Outdoor Developed Areas - Preamble
  1017.6 Openings

  This section requires openings in the surface of trails, passing spaces, and resting intervals such as spaces between the boards in a boardwalk to not allow passage of a sphere more than...

• State and Local Documents > Guidelines > 36 CFR Part 1191 ABA Accessibility Guidelines, Outdoor Developed Areas
  1017.6 Openings

  Openings in the surface of trails, passing spaces, and resting intervals shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1017.6 Openings....

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.1.1 Transfer Surface Height Adjustability

  5.1.1 Transfer Surface Height Adjustability. The transfer surface should have an adjustable height in small virtually continuous increments....

• Additional Access Publications > Proceedings of: Workshop on Improving Building Design for Persons with Low Vision
  Avoid the extremes of surface reflectivity and contrast (slides 11 and 13)

  We don’t have to have highly reflective surfaces that will still reflect light but spread it, diffuse that light instead of pinpoint reflections....

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.1.2 Transfer Surface High Height

  5.1.2 Transfer Surface High Height. The transfer surface should have an adjustable height range with an upper height measuring at least 25 inches....

• Products and Additional Resources > Products
  Beneficial Designs The Universal Trail Assessment Process (UTAP)
  

  Illustrated step-by-step instructions show how to use each assessment tool, how to accurately measure grade, cross slope , width, and obstacles and how to describe surface type....

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  National Network of ADA Centers

  The height of the transfer surface during patient transfer shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured from the floor to the top of the transfer surface....

• State and Local Documents > Codes and Standards > 2019 California Standards
  11B-804.3 Kitchen work surface

  In residential dwelling units required to comply with Section 11B-809, at least one 30 inches (762 mm) wide minimum section of counter shall provide a kitchen work surface that complies...

• State and Local Documents > Codes and Standards > 2022 California Standards
  11B-813.2.1.2 Clearance

  Floor or ground surfaces of clearances shall comply with Section 11B-302. Changes in level are not permitted....

• Products and Additional Resources > Survey and Plan Review Tools > CASI Accessibility Construction Inspection Checklist
  Built-in Elements

  BUILT-IN ELEMENTS Dining/work surfaces 11B-226, 11B-902.2 Benches 11B-903.2...

• Products and Additional Resources > Survey and Plan Review Tools > CALBO Accessibility Construction Inspection Checklist
  Built-in Elements

  BUILT-IN ELEMENTS Dining/work surfaces 11B-226, 11B-902.2 Benches 11B-903.2...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.1 Transfer Surface Height

  5.1 Transfer Surface Height...

• State and Local Documents > Codes and Standards > 2012 Florida Accessibility Code
  810.5.1 Slope

  810.5.1 Slope. Rail platforms shall not exceed a slope of 1:48 in all directions. EXCEPTION: Where platforms serve vehicles operating on existing track or track laid in existing...

• Federal Documents > Standards > ABA Accessibility Standard for GSA Facilities Pocket Guide
  810.5.1 Slope

  Rail platforms shall not exceed a slope of 1:48 in all directions. EXCEPTION: Where platforms serve vehicles operating on existing track or track laid in existing roadway, the...

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  11B-810.5.1 Slope

  Rail platforms shall not exceed a slope of 1:48 in all directions. Exception:  Where platforms serve vehicles operating on existing track or track laid in existing roadway, the...

• State and Local Documents > Codes and Standards > 2012 Texas Accessibility Standards
  810.5.1 Slope

  Rail platforms shall not exceed a slope of 1:48 in all directions. EXCEPTION: Where platforms serve vehicles operating on existing track or track laid in existing roadway, the...

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1190, Proposed Accessibility Guidelines for Pedestrian Facilities in the Public Right-of-Way: Notice of Proposed Rulemaking (NPRM)
  R407.6.1 Slope

  R407.6.1 Slope. Landing slopes shall be 2 percent maximum in any direction.

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1190, Proposed Accessibility Guidelines for Pedestrian Facilities in the Public Right-of-Way: Notice of Proposed Rulemaking (NPRM)
  R407.3 Cross Slope

  R407.3 Cross Slope. The cross slope of ramp runs shall be 2 percent maximum.

• Additional Access Publications > Proceedings of: Workshop on Improving Building Design for Persons with Low Vision
  Wayfinding is more than just graphics (slides 2 – 4)

  Cognitive process (slides 2 - 4). [Wayfinding is] really more of a cognitive process. You gather information at the beginning. You cite and execute a path to take. And then you...

• Federal Documents > Technical Assistance > ADA Checklist for New Lodging Facilities
  A. Slope at Door

  A. If a fully automatic door is not provided, is the walkway in front of the lobby door level, without any portion steeper than 1:50 (critical dimension of ´" or less), so persons...

• Federal Documents > Standards > 1991 ADA Standards for Accessible Design
  A4.13.9 Door Hardware

  Some disabled persons must push against a door with their chair or walker to open it. Applied kickplates on doors with closers can reduce required maintenance by withstanding abuse...