In alterations, where a condition for exception in section 1.1 prohibits full compliance with a specific requirement for clear floor or ground space surface, slope, size, or location, the...
Search Results "Full and Fair Cash Value"
-
4.7.1 General
-
3.4.2 ORARs in Viewing Areas
Where a condition for an exception in section 1.1 prohibits full compliance with a specific technical requirement on a portion of an ORAR for a viewing area, that portion of the ORAR shall...
-
1014.2.1.1 Clear Ground Space
One full unobstructed side of the clear ground space shall adjoin or overlap an outdoor recreation access route or trail, as applicable, or another clear ground space....
-
11B-502.1 General
Exception: Where parking spaces or access aisles are not adjacent to another parking space or access aisle, measurements shall be permitted to include the full width of the line defining...
-
§ 37.135(c)(2)
the entity shall also file a plan update meeting the requirements of §§37.137-37.139 of this part on the next following January 26 and in each succeeding year until the entity returns to full...
-
11B-208.2.3.3 Parking for guests, employees, and other non-residents
Chapter 11A indicates designated accessible parking for the adaptable residential dwelling units shall be provided on requests of residents with disabilities on the same terms and with the full...
-
11B-208.2.3.3 Parking for guests, employees, and other non-residents
Chapter 11A indicates designated accessible parking for the adaptable residential dwelling units shall be provided on requests of residents with disabilities on the same terms and with the full...
-
11B-502.1 General
Exception: Where parking spaces or access aisles are not adjacent to another parking space or access aisle, measurements shall be permitted to include the full width of the line defining...
-
502.1 General
EXCEPTION: Where parking spaces or access aisles are not adjacent to another parking space or access aisle, measurements shall be permitted to include the full width of the line defining...
-
404.3 Automatic and Power-Assisted Doors and Gates
Full-powered automatic doors shall comply with ANSI/BHMA A156.10 (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
Curb Ramps at Marked Crossings and Vehicular Lanes
The detectable warning shall extend the full width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum...
-
Obstacles [1016.5]
Frequent obstacles and obstacles that cross the full width of an ORAR can make travel difficult for people using mobility devices....
-
Documenting Exceptions and Notifying the U.S. Access Board About Exemptions
Access Board About Exemptions When a condition for an exception prohibits full compliance with a specific technical requirement on a section of trail as allowed in General Exception 1, document...
-
Tactile Models with Audio Description
The results reported from the “Tactile Talking Fish Project” showed that participants were able to correctly answer fact based questions about the types of fish, etc. when presented with full...
-
General: ADA Standard Section 601
Section 601 of the ADA Standards covers information in the current ADA Standards for plumbing elements and facilities.
-
Surfaces: ADA Standard Section 505.8
Section 505.8 covers the current ADA Standards for handrail gripping surfaces and also any adjacent surfaces to them.
-
General: ADA Standard Section 603.1
Section 603.1 of the ADA Standards covers information in the current ADA Standards for toilet and bathing rooms.
-
Clear Floor Space: ADA Standard Section 611.2
Section 611.2 covers the current ADA Standards for the clear floor space at washing machines and clothes dryers.
-
Clearance: ADA Standard Section 505.5
Section 505.5 covers the current ADA Standards for the required clearance between handrail gripping surfaces and adjacent surfaces.
-
Platform to Runway Clearance: ADA Standard Section 410.4
Section 410.4 covers the current ADA Standards for the required clearance between the platform and any runway landing.
-
Entrances: ADA Standard Section 206.5.1
Section 206.5.1 covers scoping requirements in the most current ADA Standards for doors, doorways, and gates at entrances.
-
Dispersion: ADA Standard Section 226.2
Section 226.2 covers scoping requirements in the current ADA Standards for dispersion of dining surfaces and work surfaces.
-
General: ADA Standard Section 306.1
Section 306.1 of the ADA Standards covers information in the current ADA Standards for knee and toe clearance.
-
Symbols: ADA Standard Section 407.4.7.1.3
Section 407.4.7.1.3 covers the current ADA Standards for the designation and indicator symbols on elevator car control buttons.