Accessible route components • Walking surfaces dimensions • Running slope of walking surfaces, not to exceed 1:20 (5%) • Running slope of ramps, not to exceed 1:12 (8.33%) • Cross...
Search Results "Marked Crossing"
2010 ADA Definition
Marked Crossing: A crosswalk or other identified path intended for pedestrian use in crossing a vehicular way.
-
4. COMMON PATH OF TRAVEL ITEMS
-
5.4.9 Interruptions along Transfer Support Gripping Recommendation for M301 and M302
At the point of connection, these features impede the ability to grasp completely around the cross section of the gripping surface....
-
5.4.7 Transfer Support Gripping Surface Clearance Recommendation for M301 and M302
This clearance location is around the cross section of the gripping surface (see Figure 5.4.7). NPRM Proposed Provision: Gripping surface clearance not addressed....
-
F216.13 Trailhead Signs
the signs to include information on the length of the trail or trail segment; surface type; typical and minimum tread width; typical and minimum running slope; and typical and minimum cross...
-
1193.23(b)(3) (Advisory Guidance)
Manufacturers should consult with representatives from a cross-section of disability groups, particularly individuals whose disabilities affect hearing, vision, movement, manipulation, speech...
-
§ 38.77(b)
Handrails shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less than...
-
11B-1008.2.3 Water play components
ground spaces, or turning spaces serving water play components is submerged, compliance with Sections 11B-302 _|Floor or Ground Surfaces|_, 11B-403.3, 11B-405.2 _|Slope|_, 11B-405.3 _|Cross...
-
Appendix A to Part 37—Modifications to Standards for Accessible Transportation Facilities
Because the ADAAG has been established as a Federal consensus standard by the Access Board, the Department is not republishing the regulations in their entirety, but is adopting them by cross-reference...
-
§ 38.155(a)
Handrails shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less than...
-
1015.2 Where required
In assembly seating areas at cross aisles in accordance with Section 1029.12. Elevated facility observation station access hatches at detention facilities....
-
REFERENCES
NCHRP Project 3-78, Crossing Solutions at Roundabouts and Channelized Turn Lanes for Pedestrians with Vision Disabilities....
-
Eastern Oregon Center for Independent Living (EOCIL) - Ontario, Pendleton, The Dalles, OR
Eastern Oregon Center for Independent Living (EOCIL), a center for independent living, is a cross-disability global disability resource and advocacy center that promotes independent living...
-
For People with Disabilities, Which Circulation Paths Are Usable, Available, and Closest?
Exits should be marked by tactile signs that are properly located so they can be readily found by a person who is blind or has low vision from any direction of approach to the exit access...
-
What barriers will it be "readily achievable" to remove?
and entrances; 3) Repositioning shelves; 4) Rearranging tables, chairs, vending machines, display racks, and other furniture; 5) Repositioning telephones; 6) Adding raised markings...
-
AIAU ADA Tolerances and Acceptable Measurements Training Course 1.5 LUs
Hecker View profile > Mark J. Mazz View profile > James L.E....
-
Station 7-Stopping Sight Distance (Deceleration)
There were several points along the shared use path where the pavement was marked with a 1 m reference grid on the approach to a "dummy" STOP sign controller....
-
406 Curb Ramps
Provisions for curb ramps in section 406 have been revised to: clarify requirements for cross slope (406.1) modify specifications for side flares (406.3) and landings (406.4...
-
R205 Alternate Pedestrian Access Routes
Extra distance and additional pedestrian street crossings add complexity to a trip and increase exposure of risk to accidents....
-
221.2.3.2 Vertical Dispersion
Points of entry to bleacher seating may include, but are not limited to, cross aisles, concourses, vomitories, and entrance ramps and stairs....
-
R404 Clear Spaces (Section-by-Section Analysis)
A 2 percent maximum cross slope is specified for clear spaces. Clear spaces must comply with the technical requirements for surfaces (see R302.7)....
-
Master Bedroom
Cross ventilation for fresh air while sleeping....
-
§ 38.159(b)(13) Handrails
The handrail shall have a cross-sectional diameter between 11/4 inches (32 mm) and 11/2 inches (38 mm) or shall provide an equivalent grasping surface, and have eased edges with corner radii...
-
§ 38.29(b)
Handrails shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less than...
-
CalCasp Training: Advanced Scoping
| Prepared By Paul Klein & Mark Wood Interested in this course?...
