[See subsections ...]
Search Results "Commuter Rail Transportation"
-
CHAPTER 7: COMMUNICATION FEATURES
-
T704.2 Stop Request Systems
Stop request systems shall comply with T704.3.
-
T302 Walking Surfaces
[See subsections ...]
-
CHAPTER 2: SCOPING REQUIREMENTS
[See subsections ...]
-
§ 38.57(c)
(c) The diameter or width of the gripping surface of handrails and stanchions shall be 11/4 inches to 11/2 inches or provide an equivalent gripping surface and shall provide a...
-
§ 38.123(a)(4)
(4) Faucets and flush controls shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist. The force required to activate controls shall...
-
§ 38.125(c)(2) Ramp surface
(2) Ramp surface. The ramp or bridge plate surface shall be continuous and slip resistant, shall not have protrusions from the surface greater than 1/4 inch high, shall have a clear...
-
§ 38.125(c)(4) Ramp barriers
(4) Ramp barriers. Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off.
-
§ 38.83(c)(2) Ramp surface
(2) Ramp surface. The ramp or bridge plate surface shall be continuous and slip resistant, shall not have protrusions from the surface greater then 1/4 inch, shall have a clear width...
-
§ 38.113(e) Signage
(e) Signage. The International Symbol of Accessibility shall be displayed on the exterior of all doors complying with this section unless all cars and doors are accessible and are...
-
206.7 Platform Lifts, F206.7 Platform Lifts
The final rule does not permit the use of platform lifts at the primary entrance to an emergency transportable housing unit required to provide mobility features....
-
§27.77 Recipients of Essential Air Service subsidies.
Any air carrier receiving Federal financial assistance from the Department of Transportation under the Essential Air Service Program shall, as a condition of receiving such assistance, comply...
-
206.3 Location
Additionally, accessible vertical interior circulation must be in the same area as stairs and escalators, not isolated in the back of the facility Note to Reader: The Department of Transportation’s...
-
§ 38.125(c)(8) Handrails
The handrails shall be capable of withstanding a force of 100 pounds concentrated at any point on the handrail without permanent deformation of the rail or its supporting structure....
-
12. Personal Care Attendant (PCA)
While PCAs may travel with a passenger with a disability, transportation agencies are not required to provide a personal care attendant or personal care attendant services to meet the needs...
- TSA Cares: Special Procedures - Disabilities & Medical
- TSA Cares: Passenger Support
-
809.2.6 Weather Alert Systems
809.2.6 Weather Alert Systems Where weather alert systems are provided in emergency transportable housing units, this section requires the operable parts on weather alert systems in units...
-
§ 37.21(a)(3)
(3) Any private entity that is not primarily engaged in the business of transporting people but operates a demand responsive or fixed route system....
-
II. Cost-disproportionality Is Only a Factor Under Certain Circumstances
Reg. 35544, 35581 (July 26, 1991) (Title II of the ADA regarding public services and public transportation is identical in pertinent language to Title III of the ADA) (“Costs are to be considered...
-
203.8 Residential Facilities, F203.9 Residential Facilities
The final rule revises the exception to also apply to common use areas that do not serve emergency transportable housing unit pads designed and constructed to accept the installation of...
-
11B-810.9 Escalators
Where provided, escalators shall comply with the sections 6.1.3.5.6 and 6.1.3.6.5 of ASME A17.1 and shall have a clear width of 32 inches (813 mm) minimum. Exception: Existing...
-
T210.4 Location
Wheelchair spaces shall be located as near as practicable to doorways that provide a means of accessible boarding and alighting.
-
T302.3 Openings
Openings in walking surfaces shall not allow the passage of a sphere more than 5/8 inch (16 mm) in diameter. Elongated openings shall be placed so that the long dimension is...