This example of a retail facility shows how scoping requirements for certain elements and spaces (sales counters and fitting rooms) apply and indicates employee work areas....
Search Results "Work Area Equipment"
Commonly Searched Documents
-
Example: Retail Facility
-
What does access for “approach, entry, and exit” to employee work areas require?
Access for individuals with disabilities to “approach, entry, and exit” employee work areas requires that the following be provided at a minimum: an accessible route to the work area, a...
-
11B-236.1 General
Most strength training equipment and machines are considered different types....
-
12. Seating, tables, or work surfaces
Seating, tables, or work surfaces 4.30 If provided in accessible spaces, at least one of each type provided....
-
Handrails: ADA Standard Section 405.8
Section 405.8 covers the current ADA Standards for ramp handrails.
-
11B-805.4.2 Equipment
Clear space complying with Section 11B-305.2 shall be provided as required for specific equipment....
-
Accessible Route to Dumpster and Enclosure
Employee Work Area. All or any portion of a space used only by employees and used only for work. Corridors, toilet rooms, kitchenettes and break rooms are not employee work areas....
-
Dispersion: ADA Standard Section 226.2
Section 226.2 covers scoping requirements in the current ADA Standards for dispersion of dining surfaces and work surfaces.
-
Employee Work Areas—Section 203.9 of the 2010 Standards, and Similar Sections
The 2010 Standards require a more limited level of access within employee work areas in ADA-covered facilities than UFAS, which requires employee work areas to be fully accessible....
-
11B-809.9.4 Work surfaces
Work surfaces shall be 36 inches (914 mm) maximum above the finish floor with minimum lengths at the following locations as required by this section: Linear length of 30 inches...
-
Dumpster Enclosures
Dumpster Enclosures Dumpster enclosures used exclusively by employees shall be considered employee work areas based on TAS 201.1; therefore, they must comply with TAS 203.9....
-
Accessible Work Surfaces
These guidelines generally do not require elements of a work station to be accessible....
-
Exposed Surfaces: ADA Standard Section 804.3.3
There shall be no sharp or abrasive surfaces under the work surface counters....
-
11B-804.3.3 Exposed surfaces
There shall be no sharp or abrasive surfaces under the work surface counters....
-
Wiring for Visible Alarms [§215.3]
Wiring for Visible Alarms [§215.3] All employee work areas served by audible fire alarms, regardless of size, must be designed to support later installation of visible alarms after...
-
11B-206.2.13 Exercise machines and equipment
Exercise machines and equipment required to comply with 11B-236 shall be on an accessible route....
-
11B-1004 Exercise machines and equipment
[See subsections ...]
-
11B-236 Exercise machines and equipment
[See subsections ...]
-
902 Dining Surfaces and Work Surfaces
Section 902 provides specifications for seating at dining and work surfaces....
-
Common Use Circulation Paths in Employee Work Areas
Common Use Circulation Paths in Employee Work Areas....
-
Technical Memorandum TM 2012-02 Emergency Response Buildings and Facilities
All other common use areas, elements, and spaces, including, but not limited to, parking, meeting and training rooms, and conference rooms, shall comply with applicable provisions of the...
-
Dining Surface and Work Surface
Questions were also raised about the term "work surfaces" which some commenters thought might be misconstrued as applying only to surfaces in employee work areas....
-
Imaging equipment with bores
Diagnostic scanning equipment using magnets, x-rays, or detectors into which a patient and the table on which the patient lies is inserted into the equipment through a cylindrical opening...
-
9.6 ATTENDANCE-RECORDING EQUIPMENT
Time clocks, card racks, log books, and other work assignment or attendance-recording equipment used by people in wheelchairs must be installed at a height no more than 48 in (1220 mm) above...