Where a forward reach is provided, the vertical reference plane shall be 30 inches (760 mm) long minimum....
Search Results "Vertical Dispersion"
Filters
Commonly Searched Documents
-
407.8.1.2 Vertical Plane for Forward Reach
-
407.12.1.1 Vertical Plane for Side Reach
Where a side reach is provided, the vertical reference plane shall be 48 inches (1220 mm) long minimum....
-
407.12.1.2 Vertical Plane for Forward Reach
Where a forward reach is provided, the vertical reference plane shall be 30 inches (760 mm) long minimum. Figure 407.12.1...
-
Section 36.308 Seating in Assembly Areas (Preamble, Section-by-Section Analysis)
Therefore, paragraph (a) of § 36.308 may not be interpreted to require readily achievable dispersal of wheelchair seating in assembly areas with 300 or fewer seats....
-
Section 36.308 Seating in Assembly Areas (Section-By-Section Analysis and Response to Comments)
Therefore, paragraph (a) of Sec.36.308 may not be interpreted to require readily achievable dispersal of wheelchair seating in assembly areas with 300 or fewer seats....
-
F244.2.2 Dispersion
Camping units required to provide mobility features complying with F244.2 shall provide choices of camping units comparable to, and integrated with, those available to others.
-
F245.2.4 Dispersion
Picnic units required to provide mobility features complying with F245.2 shall provide choices of picnic units comparable to, and integrated with, those available to others.
-
Dispersion [F245.2.4]
Picnic units with mobility features must provide choices of picnic units comparable to, and integrated with, those available to others.
-
Dispersion [F244.2.2]
Camping units with mobility features must provide choices of units comparable to and integrated with those available to all other campers. For instance, if camping units are provided...
-
F244.2.2 Dispersion
This section requires camping units with mobility features to provide choices of camping units comparable to, and integrated with, those available to others.
-
F245.2.4 Dispersion
This section requires picnic units with mobility features to provide choices of picnic units comparable to, and integrated with, those available to others.
-
F245.2.4 Dispersion
Picnic units required to provide mobility features complying with F245.2 shall provide choices of picnic units comparable to, and integrated with, those available to others.
-
F244.2.2 Dispersion
Camping units required to provide mobility features complying with F244.2 shall provide choices of camping units comparable to, and integrated with, those available to others.
-
11B-233.3.5 Dispersion
mobility features complying with Sections 11B-809.2 through 11B-809.4 and residential dwelling units required to provide communication features complying with Section 11B-809.5 shall be dispersed...
-
407.12.1 Vertical Reference Plane (Section-by-Section Analysis)
407.12.1 Vertical Reference Plane (Section-by-Section Analysis) This section proposes that the positioning of operable parts for side reaches and forward reaches be determined with respect...
-
Section 36.308 Seating in Assembly Areas (Section-by-Section Analysis)
This provision does not obviate the obligation to comply with applicable requirements for new construction and alterations, including dispersion of accessible seating....
-
§ 35.151(g) Assembly areas
(g) Assembly areas. Assembly areas subject to the proposed standards shall comply with the provisions applicable to assembly areas, including, but not limited to, sections 221 and...
-
§ 35.151(g) Assembly areas.
(g) Assembly areas. Assembly areas subject to this section shall comply with the provisions of the 2010 Standards applicable to assembly areas, including, but not limited to,...
-
Clear Width [4.13.5] and Vertical Clearance
Clear Width [4.13.5] and Vertical Clearance The clear width of the opening is measured from the face of the door in a 90 degrees open position to the opposite stop....
-
Clear Width and Vertical Clearance of Doors and Gates [§404.2.3]
Clear Width and Vertical Clearance of Doors and Gates [§404.2.3]...
-
Accessible Boat Slips
Section 235.2.1 of the 2010 Standards addresses dispersion and requires that boat slips “shall be dispersed throughout the various types of boat slips provided.”...
-
Standards Specific to Assembly Areas
Dispersion of Wheelchair Spaces: Box Seats: Wheelchair spaces must be provided and located in not fewer than 20% of all boxes.Wheelchair spaces must be dispersed vertically, horizontally...
-
407.12.1.1 Vertical Plane for Side Reach (Section-by-Section Analysis)
407.12.1.1 Vertical Plane for Side Reach (Section-by-Section Analysis) This section proposes that, where a side approach is provided, the vertical reference plane must have a minimum...
-
407.12.1.2 Vertical Plane for Forward Reach (Section-by-Section Analysis)
407.12.1.2 Vertical Plane for Forward Reach (Section-by-Section Analysis) This section proposes that, where a forward reach is provided, the vertical reference plane must be, at a minimum...