Edge Protection [§405.9] Edge protection along ramp runs and landings keep wheelchair casters and crutch tips on the surface and can be provided by curbs, barriers, or extended surfaces...
Search Results "Platform Edge"
Commonly Searched Documents
-
Edge Protection [§405.9]
-
4.8.7 Edge Protection
Ramps and landings with drop-offs shall have curbs, walls, railings, or projecting surfaces that prevent people from slipping off the ramp. Curbs shall be a minimum of 2 in (50 mm)...
-
4.8.7 EDGE PROTECTION
Ramps and landings with drop-offs shall have curbs, walls, railings, or projecting surfaces that prevent people from slipping off the ramp. Curbs shall be a minimum of 2 in (50 mm)...
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
-
1005.3.2 Extended Ground or Deck Surface
The ground or deck surface shall extend 12 inches (305 mm) minimum beyond the inside face of the railing. Toe clearance shall be provided and shall be 30 inches (760 mm) wide minimum...
-
11B-1005.3.2 Extended ground or deck surface
The ground or deck surface shall extend 12 inches (305 mm) minimum beyond the inside face of the railing. Toe clearance shall be provided and shall be 30 inches (762 mm) wide minimum...
-
11B-1005.3.2 Extended ground or deck surface
The ground or deck surface shall extend 12 inches (305 mm) minimum beyond the inside face of the railing. Toe clearance shall be provided and shall be 30 inches (762 mm) wide minimum...
-
TRANSIT BOARDING PLATFORM
[DSA-AC] A horizontal, generally level surface, whether raised above, recessed below or level with a transit rail, from which persons embark/disembark a fixed rail vehicle.
-
Clear Floor Space: ADA Standard Section 410.3
Section 410.3 covers the current ADA Standards for clear floor space in platform lifts.
-
Operable Parts: ADA Standard Section 410.5
Section 410.5 covers the current ADA Standards for operable parts of the platform lift controls.
- EZ-ACCESS PASSPORT® Residential Vertical Platform Lift
- Butler Mobility Inclined Platform Wheelchair Lift
-
11B-405.9.2 Curb or barrier
FIGURE 11B-405.9.2 ‡‡ CURB OR BARRIER EDGE PROTECTION ETA Editor's Note 2013 CBC requires either a curb or a barrier for edge protection at ramps, and does not recognize the...
-
11B-810.5.3 Platform and vehicle floor coordination
Low-level platforms shall be 8 inches (203 mm) minimum above top of rail....
-
405.9.2 Curb or Barrier
[ECTCR UFAS 4.8.7] Figure 405.9.2 Curb or Barrier Edge Protection...
-
405.9.2 Curb or Barrier
Figure 405.9.2 Curb or Barrier Edge Protection...
- Figure 405.9.2 Curb or Barrier Edge Protection – Drawing from the U.S. Access Board
-
Fishing Piers and Platforms: ADA Standard Section 206.2.14
Section 206.2.14 covers scoping requirements in the most current ADA Standards for accessible routes to fishing piers and platforms.
-
11B-405.9.2 Curb or barrier
ETA Editor's Note CBC requires either a curb or a barrier for edge protection at ramps, and does not recognize the extended floor or ground surface also permitted by 2010 ADAS....
-
11B-405.9.2 Curb or barrier
[Safe Harbor 11B-405.9.2] ETA Editor's Note CBC requires either a curb or a barrier for edge protection at ramps, and does not recognize the extended floor or ground surface...
-
Existing Site Constraints: ADA Standard Section 206.7.5
Section 206.5.1 covers scoping requirements in the most current ADA Standards for the use of platform lifts due to existing site constraints.
-
11B-405.9.1 Reserved
11B-405.9.1 Reserved. [2010 ADAS] 405.9.1 Extended Floor or Ground Surface. The floor or ground surface of the ramp run or landing shall extend 12 inches (305 mm) minimum beyond...
-
11B-405.9.1 Reserved
[2010 ADAS] 405.9.1 Extended Floor or Ground Surface. The floor or ground surface of the ramp run or landing shall extend 12 inches (305 mm) minimum beyond the inside face of a...
-
11B-405.9.1 Reserved.
[2010 ADA Standards] 405.9.1 Extended Floor or Ground Surface. The floor or ground surface of the ramp run or landing shall extend 12 inches (305 mm) minimum beyond the inside face...