Corada

Landings [4.8.4]

Landings at the top and bottom and intermediate landings, must be at least 60 inches long so maneuvering space is available for approaching ramps straight on....

11B-405.9 Edge protection

Edge protection complying with 405.9.1 or 405.9.2 shall be provided on each side of ramp runs and at each side of ramp landings....

11B-405.9 Edge protection

Edge protection complying with 405.9.1 or 405.9.2 shall be provided on each side of ramp runs and at each side of ramp landings....

11B-240.2.1 Ground level play components

Ground level play components shall be provided in the number and types required by Section 11B-240.2.1....

11B-240.2.1 Ground level play components

Ground level play components shall be provided in the number and types required by Section 11B-240.2.1....

Edge Protection: ADA Standard Section 405.9

Section 405.9 covers the current ADA Standards for edge protection at ramps.

Doorways: ADA Standard Section 405.7.5

Section 405.7.5 covers the current ADA Standards for doorway maneuvering clearance at ramp landings.

11B-405.7.2.1

Top landings shall be 60 inches (1524 mm) wide minimum. Advisory 11B-405.7.2.1 Top landing width....

1.2.3 Landings

1.2.3 Landings. Both measurements of ramp landings as described in Section 1.1.15 should not exceed a plus tolerance of 0.5%....

Leveling: ADA Standard Section 408.4.4

Section 408.4.4 covers the ADA Standards for the self-leveling feature in limited-use/limited-application elevators.

11B-303.3 Beveled

A change in level of 1/2 inch (13 mm) is permitted to be 1/4 inch (6.4 mm) vertical plus 1/4 inch (6.4 mm) beveled....

11B-303.3 Beveled

A change in level of 1/2 inch (13 mm) is permitted to be 1/4 inch (6.4 mm) vertical plus 1/4 inch (6.4 mm) beveled....

Error/Omission: Landing areas where ramps change direction (e.g., switchbacks or 90° turns) are too small.

Error/Omission: Landing areas where ramps change direction (e.g., switchbacks or 90° turns) are too small....

11B-303.2 Vertical

Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical and without edge treatment. [2010 ADA Standards] 303.2 Vertical....

11B-303.2 Vertical

Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical and without edge treatment. [2010 ADA Standards] 303.2 Vertical....

Can handrails overlap ramp landings?

Along runs and landings, the minimum clear width must be measured between the leading edge of handrails....

11B-303.4 Ramps

Changes in level greater than ½ inch (12.7 mm) high shall be ramped, and shall comply with Section 11B-405 or 11B-406....

11B-303.4 Ramps

Changes in level greater than ½ inch (12.7 mm) high shall be ramped, and shall comply with Section 11B-405 or 11B-406....

11B-411.2 Elevator landing requirements

Elevator landings shall comply with Section 11B-411.2....

11B-411.2 Elevator landing requirements

Elevator landings shall comply with Section 11B-411.2....

11B-411.2 Elevator landing requirements

Elevator landings shall comply with Section 11B-411.2....