Coat hooks provided within the room shall be located within one of the reach ranges specified in 308....
Search Results "Fitting Room"
-
803.5 Coat Hooks and Shelves
-
Question 20
Is the required floor and wall space inside public restrooms and fitting rooms blocked by obstacles such as trash cans, chairs, or shelving?...
-
4.35.5 Mirror
Where mirrors are provided in dressing rooms of the same use, then in an accessible dressing room, a full-length mirror, measuring at least 18 in wide by 54 in high (460 mm by 1370 mm),...
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground. Mirrors shall be full length with a reflective...
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground. Mirrors shall be full length with a reflective...
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground. Mirrors shall be full length with a reflective...
-
505.9 Fittings
505.9 Fittings. Handrails shall not rotate within their fittings....
-
609.6 Fittings
609.6 Fittings. Grab bars shall not rotate within their fittings....
-
Clear Floor Space [4.35.2]
Benches long enough to allow a supine position can be helpful where people may to need to completely undress or change clothing (locker and shower rooms, certain medical treatment or exam...
-
803.2 Turning Space
Turning space complying with 304 shall be provided within the room....
-
803.2 Turning Space
Turning space complying with 304 shall be provided within the room....
-
11B-803.2 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
11B-803.2 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
11B-803.2 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
803.2 Turning Space
Turning space complying with 304 shall be provided within the room....
-
505.9 Fittings
Handrails shall not rotate within their fittings....
-
505.9 Fittings
Handrails shall not rotate within their fittings....
-
505.9 Fittings
Handrails shall not rotate within their fittings....
-
609.6 Fittings
Grab bars shall not rotate within their fittings....
-
609.6 Fittings
Grab bars shall not rotate within their fittings....
-
609.6 Fittings
Grab bars shall not rotate within their fittings....
-
F222.1 General
Where dressing rooms, fitting rooms, or locker rooms are provided, at least 5 percent, but no fewer than one, of each type of use in each cluster provided shall comply with 803....
-
222.1 General
Where dressing rooms, fitting rooms, or locker rooms are provided, at least 5 percent, but no fewer than one, of each type of use in each cluster provided shall comply with 803....
-
11B-222.1 General
Where dressing rooms, fitting rooms, or locker rooms are provided, at least 5 percent, but no fewer than one, of each type of use in each cluster provided shall comply with Section 11B-803...