Where a circulation path serving boarding platforms crosses tracks, it shall comply with 402....
Search Results "Boarding Platform"
-
810.10 Track Crossings
-
§ 38.83(b)(6) Platform surface
(6) Platform surface. The lift platform surface shall be free of any protrusions over 1/4 inch high and shall be slip resistant....
-
§ 38.125(b)(5) Platform barriers
(5) Platform barriers. The lift platform shall be equipped with barriers to prevent any of the wheels of a wheelchair or mobility aid from rolling off the lift during its operation....
-
§ 38.95(b)(7) Platform gaps
(7) Platform gaps. Any openings between the lift platform surface and the raised barriers shall not exceed 5/8 inch wide....
-
Track Crossing
In the final rule, the Board has simplified this provision by applying specifications for accessible routes. An exception preserves the permitted 2 ½ inch gap for wheel flanges....
-
11B-810.1.1 Vehicle boarding
Stations shall not be designed or constructed so as to require persons with disabilities to board or alight from a vehicle at a location other than one used by the general public....
-
11B-810.1.1 Vehicle boarding
Stations shall not be designed or constructed so as to require persons with disabilities to board or alight from a vehicle at a location other than one used by the general public....
- Detectable Warning Systems, Inc. EZ Set Tile™
-
ADA & Level Boarding Guidance - Platform Height
49 CFR §§37.41-43; 37.9(a), (d); 49 CFR Part 37, App. A (810.5.3) DECEMBER 14, 2011
-
What is the Minimum Width for Non-Level Boarding?
[49 CFR §§ 37.9, 37.41-37.43, 38.125] June 16, 2015
-
Rail Platforms: ADA Standard Section 810.5
Rail platforms shall comply with 810.5....
-
10.3.1(8)
(8) Platform edges bordering a drop-off and not protected by platform screens or guard rails shall have a detectable warning....
-
T404.3 Ramps and Bridgeplates
Where the space between the floor of non-rail vehicles and a boarding platform is greater than 2 inches (51 mm) horizontally or 5/8 inch (16 mm) vertically when measured at 50 percent passenger...
-
Two Step Transfer Evaluation
the two-step transfers appear more able on these transfers when comparing the heights achieved during the two-step transfers to the heights achieved from the WMD to and from the first platform...
-
§ 38.73(d)(1) Requirements
The design of level-entry vehicles shall be coordinated with the boarding platform or mini-high platform design so that the horizontal gap between a vehicle at rest and the platform shall...
-
Recreational Boating Facilities and Fishing Piers and Platforms: ADA Standard Section 206.7.10
Section 206.7.9 covers the ADA Standards for platform lifts used to connect accessible routes to recreational boating facilities, fishing piers and platforms.
-
T403 Lifts
These provisions addressed design load, controls, manual operation, platform characteristics, gaps, threshold ramps, contrast, deflection, movement, boarding direction, standees, and handrails...
-
11B-810.5 Rail Platforms
Rail platforms shall comply with Section 11B-810.5....
-
11B-810.5 Rail Platforms
Rail platforms shall comply with Section 11B-810.5....
-
§ 38.125(b)(7) Platform gaps
(7) Platform gaps. Any openings between the lift platform surface and the raised barriers shall not exceed 5/8 inch wide....
-
10.3.1(13)
(13) Where it is necessary to cross tracks to reach boarding platforms, the route surface shall be level and flush with the rail top at the outer edge and between rails, except for a maximum...
-
§ 37.42(e)
(e) In any situation using a combination of high and low platforms, a commuter or intercity rail operator shall not employ a solution that has the effect of channeling passengers into a...
-
§ 37.42(e)
(e) In any situation using a combination of high and low platforms, a commuter or intercity rail operator shall not employ a solution that has the effect of channeling passengers into a...
- Tile Tech Pavers® Detectable-Warning™ Pavers